Honda Pilot Third Generation (2016-present) rear view camera not working how to fix

Honda Pilot Third Generation (2016-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

528 words

Problem Statement

Learn how to diagnose and fix the rear view camera issue in Honda Pilot (2016-present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shocks.
•Ensure the vehicle is on a flat surface and secured before performing any repairs.

Symptoms

•Rear view camera display is blank or shows no image
•Error message displayed on the infotainment screen
•Camera is stuck on a single frame or showing distorted images
•No sound or feedback when engaging reverse gear
•Reverse lights may not illuminate

Diagnostic Steps

1
Check for error codes using an OBD-II scanner to identify any related issues.
2
Inspect the rear view camera lens for dirt, obstructions, or damage.
3
Verify the connection of the rear view camera wiring harness to ensure it is secure.
4
Test the camera power supply with a multimeter to confirm it is receiving voltage.
5
Examine the infotainment system settings to ensure the camera function is enabled.
6
Inspect the vehicle's reverse light circuit for proper operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdriver set
•Trim removal tools
•Socket set

Parts Required

•Rear view camera (if damaged)
•Wiring harness (if corroded or damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for error codes using an OBD-II scanner to identify any related issues.
2
Inspect the rear view camera lens for dirt, obstructions, or damage.
3
Verify the connection of the rear view camera wiring harness to ensure it is secure.
4
Test the camera power supply with a multimeter to confirm it is receiving voltage.
5
Examine the infotainment system settings to ensure the camera function is enabled.
6
Inspect the vehicle's reverse light circuit for proper operation.

Solution

1. Preparation

Gather tools and parts needed.
Disconnect the vehicle's battery to prevent electrical shorts.

Tools Required:

OBD-II scanner
Multimeter
Screwdriver set
Trim removal tools
Socket set

2. Inspect and Clean Camera

Remove any dirt or debris from the camera lens.
If the lens is scratched or damaged, consider replacing the camera.

3. Check and Secure Wiring Connections

Locate the rear view camera wiring harness, typically found near the tailgate or rear liftgate.
Disconnect the wiring harness and inspect for corrosion or damage.
Reconnect the wiring harness securely.

4. Test Power Supply

Using a multimeter, set it to measure DC voltage.
Connect the multimeter probes to the camera’s power supply wires while someone shifts the vehicle into reverse.
Confirm that the voltage is present (typically around 12V).

5. Inspect Infotainment Settings

Turn on the vehicle and navigate to the settings of the infotainment system.
Ensure the rear camera option is enabled.
Perform a soft reset of the infotainment system if necessary.

6. Reassemble and Test

Reassemble any components removed during the inspection and repair.
Reconnect the vehicle's battery.
Test the rear view camera functionality by shifting into reverse.