why does my Honda CR-V Fifth Generation (2017-2022) shake when I accelerate

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

540 words

Problem Statement

Learn to diagnose and fix shaking during acceleration in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely supported on jack stands before working underneath.
•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before working on any components near the engine.

Symptoms

•Vibration felt through the steering wheel during acceleration
•Shaking increases with speed and may diminish at constant speed
•Unusual noises (clunking or rattling) during acceleration
•Steering wheel may pull to one side
•Increased wear on tires or uneven tire tread

Diagnostic Steps

1
Inspect tires for uneven wear or damage, and check tire pressure.
2
Perform a visual inspection of the suspension components for any signs of damage or wear.
3
Check for any play in the wheel bearings by lifting the vehicle and rotating the wheels by hand.
4
Scan the vehicle for any error codes using an OBD-II scanner.
5
Inspect the driveshaft and CV joints for any signs of wear or damage.
6
Test drive the vehicle to isolate the conditions under which the shaking occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Tire iron
•Torque wrench
•Socket set
•Impact wrench (if necessary)
•OBD-II scanner
•CV joint removal tool

Parts Required

•Tires (if damaged)
•Suspension components (if worn)
•Driveshaft or CV joints (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for uneven wear or damage, and check tire pressure.
2
Perform a visual inspection of the suspension components for any signs of damage or wear.
3
Check for any play in the wheel bearings by lifting the vehicle and rotating the wheels by hand.
4
Scan the vehicle for any error codes using an OBD-II scanner.
5
Inspect the driveshaft and CV joints for any signs of wear or damage.
6
Test drive the vehicle to isolate the conditions under which the shaking occurs.

Solution

1. Preparation

Gather all necessary tools and safety equipment.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery if working on electrical components.

2. Tire Inspection and Replacement

Sub-steps:
1. Remove the wheel covers or hubcaps if applicable.
2. Loosen the lug nuts slightly, then lift the vehicle with a jack and secure it on jack stands.
3. Remove the wheels and inspect the tires for uneven wear, bulges, or damage.
4. If tires are damaged or worn, replace them with new tires of appropriate specifications.
Tools Required: Jack, jack stands, tire iron, torque wrench.
Safety Warnings: Ensure the vehicle is securely supported on jack stands before working underneath.

3. Suspension Component Repair

Sub-steps:
1. Inspect the control arms, bushings, struts, and shocks for damage or excessive wear.
2. Replace any damaged or worn suspension components as necessary.
3. Reassemble and torque all bolts to manufacturer specifications.
Tools Required: Socket set, torque wrench, pry bar.

4. Driveshaft and CV Joint Inspection

Sub-steps:
1. Inspect the driveshaft for any signs of damage or imbalance.
2. Check the CV joints for any torn boots or excessive play.
3. Replace any damaged driveshafts or CV joints.
Tools Required: Socket set, impact wrench (if necessary), CV joint removal tool.