FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda CR-V's exhaust smells like gas, what should I check? - Honda CR-V
Home/Cars/Honda/CR-V/Sixth Generation (2023-present)/my Honda CR-V's exhaust smells like gas, what should I check?

my Honda CR-V's exhaust smells like gas, what should I check?

Honda CR-V Sixth Generation (2023-present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
552 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix gasoline smell from exhaust in Honda CR-V. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before inspecting the fuel system.

Symptoms

  • •Strong gasoline odor from the exhaust
  • •Poor fuel economy
  • •Engine misfire or rough idle
  • •Black smoke from the exhaust
  • •Check engine light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Fuel pressure gauge
  • •Spark plug gap tool
  • •Wrench set
  • •Fuel injector cleaner

Parts Required

  • •Fuel injectors (if faulty)
  • •Spark plugs (if fouled)
  • •Exhaust components (if damaged)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the engine is cool.
  • Disconnect the battery to prevent electrical issues.
2. Inspect Fuel Injectors
  • Sub-steps:
    1. Remove the engine cover if applicable.
    2. Locate the fuel rail and the injectors.
    3. Use a fuel injector cleaner or a visual inspection to check for leaks.
    4. Replace any faulty injectors with new ones, ensuring proper seating.
  • Tools Required: Socket set, fuel injector cleaner
3. Test Fuel Pressure
  • Sub-steps:
    1. Connect the fuel pressure gauge to the fuel rail test port.
    2. Turn the ignition to the "ON" position (do not start the engine) to prime the fuel system.
    3. Check the reading on the gauge; it should match the specifications in the service manual.
    4. If pressure is low, inspect the fuel pump and replace if necessary.
  • Tools Required: Fuel pressure gauge
4. Inspect and Replace Spark Plugs
  • Sub-steps:
    1. Remove the ignition coils or wires to access the spark plugs.
    2. Inspect each spark plug for carbon buildup or damage.
    3. Clean or replace plugs as needed, ensuring proper gap settings.
    4. Reinstall the ignition components.
  • Tools Required: Socket set, spark plug gap tool
5. Inspect Exhaust System
  • Sub-steps:
    1. Visually inspect the exhaust system for any cracks or holes.
    2. Use a soapy water solution to check for leaks at joints and connections.
    3. Repair or replace any damaged sections of the exhaust system.
  • Tools Required: Wrench set, exhaust patch kit (if needed)