my Honda CR-V Fifth Generation (2017-2022) suspension feels soft and bouncy what's happening

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

473 words

Problem Statement

Learn how to diagnose and fix soft and bouncy suspension issues in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Allow the vehicle to cool before handling any components that may have been heated during operation.

Symptoms

•Excessive bouncing when driving over bumps
•Poor handling during turns
•Increased body roll while cornering
•Uneven tire wear
•Feeling of instability at higher speeds

Diagnostic Steps

1
Inspect the shock absorbers for visible leaks or damage.
2
Perform a bounce test by pushing down on each corner of the vehicle and observing how quickly it returns to its original position.
3
Check the tire pressure to ensure it is within manufacturer's specifications.
4
Examine the suspension components, including control arms and bushings, for wear or damage.
5
Look for signs of worn or damaged springs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Jack stands
•Impact wrench (optional)
•Spring compressors (if replacing springs)

Parts Required

•New shock absorbers (if needed)
•New springs (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the shock absorbers for visible leaks or damage.
2
Perform a bounce test by pushing down on each corner of the vehicle and observing how quickly it returns to its original position.
3
Check the tire pressure to ensure it is within manufacturer's specifications.
4
Examine the suspension components, including control arms and bushings, for wear or damage.
5
Look for signs of worn or damaged springs.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Wear protective gear like gloves and goggles.

2. Inspect and Replace Shock Absorbers

Tools Required: Socket set, torque wrench, jack stands, impact wrench (optional).
Lift the vehicle using the jack and secure it with jack stands.
Remove the wheel on the affected corner.
Locate the shock absorber and identify mounting bolts.
Remove the top and bottom mounting bolts of the shock absorber.
Carefully detach the old shock absorber and inspect the mountings for wear.
Install the new shock absorber, ensuring alignment with the mounting brackets.
Torque the mounting bolts to the manufacturer's specifications (typically around 40-60 ft-lbs).
Reinstall the wheel and lower the vehicle.

3. Inspect and Replace Springs (if necessary)

If the bounce test reveals excessive sag, inspect the springs.
Repeat the wheel removal process.
Carefully remove any protective covers or components obstructing access to the springs.
Use spring compressors to safely remove the old springs if they are damaged or sagging.
Install new springs, ensuring they are seated correctly in the mounts.
Reassemble all components and verify that everything is torqued to specifications.