how to reset the maintenance light on a Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Sixth Generation (2023-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

367 words

Problem Statement

Learn how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022) after scheduled maintenance. Step-by-step guide included.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure that the vehicle is in a safe location before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Display shows 'Maintenance Due' message
•Engine oil change or service reminder notification

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Verify that the maintenance light is illuminated on the dashboard.
3
Confirm that the vehicle is in the 'OFF' position before proceeding to the reset process.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob or key

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked safely with the ignition in the "OFF" position.
Have your key fob or key ready.

2. Turn on the Ignition

Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Alternatively, press the "Start" button without pressing the brake pedal if equipped with a push start.

Use the "Home" button on the steering wheel to navigate to the vehicle settings on the display.
Scroll down to "Maintenance" and select it.

4. Reset the Maintenance Light

Select "Oil Life" or "Maintain" depending on the display options.
Choose "Reset" or "Reset Oil Life" when prompted.
Confirm the reset if required by selecting "Yes."

5. Turn off the Ignition

Turn the ignition switch to the "OFF" position.
Remove the key from the ignition if applicable.