how to reset the check engine light on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Sixth Generation (2023-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

434 words

Problem Statement

Learn how to reset the check engine light on Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with diagnostic procedures and tools required.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before performing any diagnostics.

Symptoms

•Check engine light illuminated
•Potential stored error codes in the vehicle’s computer system
•Vehicle may exhibit no noticeable performance issues or symptoms

Diagnostic Steps

1
Use an OBD-II scanner to check for any active or stored error codes in the vehicle’s computer.
2
Record the error codes for reference; this can help identify if the issue needs further investigation.
3
Clear the error codes using the OBD-II scanner.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: OBD-II scanner
Ensure the vehicle is parked on a flat surface with the ignition off.

2. Connect the OBD-II Scanner

Locate the OBD-II port under the dashboard near the driver's seat.
Plug the OBD-II scanner into the port securely.

3. Turn on the Ignition

Turn the ignition key to the "ON" position without starting the engine.
Alternatively, press the start button without pressing the brake pedal if equipped.

4. Access Error Codes

Follow the instructions on the OBD-II scanner to navigate to the 'Read Codes' function.
Review any stored error codes displayed on the scanner.

5. Clear Error Codes

Navigate to the 'Erase Codes' or 'Clear Codes' function on the OBD-II scanner.
Confirm the action when prompted by the scanner to clear the codes.

6. Disconnect the Scanner

Remove the OBD-II scanner from the port after successfully clearing the codes.
Turn the ignition off.

7. Test Drive the Vehicle

Start the engine and allow it to idle for a few moments.
Take the vehicle for a short test drive to ensure the check engine light remains off.