Honda CR-V Fifth Generation (2017-2022) power windows not working how to fix

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

590 words

Problem Statement

Learn how to diagnose and fix power windows not working in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Ensure the vehicle is secure to prevent rolling or moving while working on it.

Symptoms

•Power window switches do not respond when pressed
•Windows do not move up or down
•Windows may make a clicking sound when the switch is activated
•The master window switch is illuminated but does not operate
•Check for any blown fuses related to the power windows
•No response when trying to operate the windows from the driver’s side control

Diagnostic Steps

1
Inspect the fuse box for blown fuses related to the power windows; refer to the owner's manual for fuse locations.
2
Use a multimeter to test the voltage at the power window switch.
3
Check the individual window switches for continuity using a multimeter.
4
Inspect the wiring harness for any visible damage or loose connections.
5
Test the window motor by applying direct battery voltage to confirm if it operates.
6
Verify the operation of the master window switch from the driver’s side.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Trim removal tools
•Multimeter
•Fuse puller

Parts Required

•Power window switch (if faulty)
•Window motor (if faulty)
•Replacement fuses (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Power window switches do not respond when pressed

•Windows do not move up or down

•Windows may make a clicking sound when the switch is activated

•The master window switch is illuminated but does not operate

•Check for any blown fuses related to the power windows

•No response when trying to operate the windows from the driver’s side control

Diagnostic Steps

1
Inspect the fuse box for blown fuses related to the power windows; refer to the owner's manual for fuse locations.
2
Use a multimeter to test the voltage at the power window switch.
3
Check the individual window switches for continuity using a multimeter.
4
Inspect the wiring harness for any visible damage or loose connections.
5
Test the window motor by applying direct battery voltage to confirm if it operates.
6
Verify the operation of the master window switch from the driver’s side.

Solution

1. Preparation

Gather all necessary tools and parts.
Disconnect the vehicle battery to ensure safety during repairs.
Ensure the vehicle is on a flat surface and secure it with wheel chocks.

2. Inspect and Replace Fuses

Locate the fuse box and remove the cover.
Identify the fuse for the power windows using the diagram on the fuse box cover.
Use a fuse puller to remove the fuse and check if it is blown (metal strip inside is broken).
Replace with a new fuse of the same amperage if necessary.

3. Test and Replace Window Switches

Remove the door panel using a socket set and trim removal tools.
Disconnect the window switch connector.
Use a multimeter to test for continuity. Replace the window switch if defective.
Reconnect and test the new switch before reassembling the door panel.

4. Inspect and Replace Window Motor

If the switch is functional, disconnect the window motor from the wiring harness.
Apply direct voltage to the motor terminals to see if it operates.
If the motor does not respond, remove it from the door by unscrewing the mounting bolts.
Install a new window motor, reconnect the harness, and test its operation.

5. Reassemble Door Panel

After repairs, reattach the door panel securely.
Ensure all clips and screws are in place.
Reconnect the battery and test the power windows for proper functionality.