FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
what causes the traction control light to come on in my Honda CR-V Fifth Generation (2017-2022) - Honda CR-V
Home/Cars/Honda/CR-V/6th Gen (2023-Present)/what causes the traction control light to come on in my Honda CR-V Fifth Generation (2017-2022)

what causes the traction control light to come on in my Honda CR-V Fifth Generation (2017-2022)

Honda CR-V 6th Gen (2023-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
508 words

Problem Statement

Learn how to diagnose and fix traction control light issues in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the vehicle to cool before inspecting components.

Symptoms

  • •Traction control light illuminated on the dashboard
  • •Unresponsive traction control system during slippery conditions
  • •Engine power reduction or throttle response changes
  • •ABS warning light may also be illuminated
  • •Unusual noises during acceleration or braking

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Torque wrench
  • •Tire pressure gauge

Parts Required

  • •Wheel speed sensor (if faulty)
  • •Traction control switch (if faulty)
  • •Replacement tires (if needed)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Park the vehicle on a level surface and engage the parking brake.
  • Disconnect the negative battery terminal to ensure safety while working on electrical components.
2. Inspect Wheel Speed Sensors
  • Remove the wheel corresponding to the sensor being checked.
  • Clean the wheel speed sensor and the area around it to remove debris.
  • Use a multimeter to check the sensor's resistance; it should fall within manufacturer specifications (typically around 1,000 ohms).
  • Reconnect any connectors and reinstall the wheel.
3. Tire Inspection
  • Check all tires for proper inflation according to manufacturer specifications.
  • Inspect tire tread for uneven wear or damage.
  • Rotate tires if uneven wear is observed, and replace them if necessary.
4. ABS System Check
  • Use the OBD-II scanner to check for ABS-related fault codes.
  • If ABS codes are present, further diagnose the ABS module and wiring harness.
  • Clear any fault codes after repairs are made and test drive the vehicle.
5. Traction Control Switch Test
  • Locate the traction control switch in the vehicle cabin.
  • Use a multimeter to check for continuity when the switch is pressed.
  • Replace the switch if it is found to be faulty.