how to reset the oil change light on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V 6th Gen (2023-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

342 words

Problem Statement

Learn how to reset the oil change light on Honda CR-V (2017-2022) with this step-by-step guide. Quick and easy instructions for a successful reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in 'Park' mode before starting the reset procedure.

Symptoms

•Oil change light remains illuminated on the dashboard
•No other warning lights present
•Engine oil has been changed recently

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Confirm that the oil change has been performed and the new oil filter is installed.
3
Check the oil level with the dipstick to ensure proper oil level after the change.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for resetting the oil change light.

Parts Required

•None required for resetting the oil change light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather the keys to the vehicle.
Ensure the vehicle is parked on a level surface and in "Park" mode.

2. Access the Oil Change Light Reset Procedure

Insert the key into the ignition and turn it to the "ON" position (do not start the engine).
On the dashboard, ensure the odometer is displayed (not the trip meter).
Press the "Select/Reset" button on the dashboard until the maintenance information screen appears.

3. Reset the Oil Change Light

Once in the maintenance menu, navigate to "Engine Oil" using the "Select/Reset" button.
Press and hold the "Select/Reset" button until the display shows "Reset?"
Release the button and then press it again to confirm the reset.

4. Verify the Reset

Turn off the ignition.
Turn the ignition back to the "ON" position to check if the oil change light is no longer illuminated.