how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V 6th Gen (2023-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

352 words

Problem Statement

Learn how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a level surface before starting the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Engine running normally

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Turn the ignition switch to the 'OFF' position.
4
Turn the ignition switch back to the 'ON' position to check if the maintenance light is off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools: None required for this procedure.

2. Turn Ignition to ON

Insert the key or press the start button to turn the ignition to the "ON" position without starting the engine.
Ensure all dashboard lights illuminate.

3. Press Gas Pedal

Firmly press the gas pedal three times within 10 seconds.
Ensure the pedal is fully pressed down each time for the reset to register.

4. Turn Ignition Off

Turn the ignition switch to the "OFF" position after pressing the gas pedal.
Wait a moment before the next step.

5. Verify Reset

Turn the ignition switch back to the "ON" position.
Check the dashboard to confirm that the maintenance light is no longer illuminated.