how to fix Honda CR-V Fifth Generation (2017-2022) transmission slipping when shifting

Honda CR-V 6th Gen (2023-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

517 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems
•Allow the engine to cool before opening the transmission fluid system

Symptoms

•Transmission slips during acceleration
•Delayed engagement when shifting from park to drive or reverse
•Unusual engine RPM fluctuations while driving
•Check engine light may be illuminated
•Harsh or erratic shifting

Diagnostic Steps

1
Scan the vehicle's onboard computer for error codes using an OBD-II scanner
2
Check the transmission fluid level and condition (color and smell)
3
Inspect the transmission fluid for contamination or burnt odor
4
Test the transmission solenoids for proper operation using a multimeter
5
Examine the transmission control module for any signs of damage or loose connections
6
Conduct a road test to replicate the slipping issue and observe the behavior at various speeds

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Transmission fluid dipstick
•Funnel
•Torque wrench

Parts Required

•Honda ATF DW-1 transmission fluid
•Transmission filter (if applicable)
•Gasket for transmission pan (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard computer for error codes using an OBD-II scanner
2
Check the transmission fluid level and condition (color and smell)
3
Inspect the transmission fluid for contamination or burnt odor
4
Test the transmission solenoids for proper operation using a multimeter
5
Examine the transmission control module for any signs of damage or loose connections
6
Conduct a road test to replicate the slipping issue and observe the behavior at various speeds

Solution

1. Preparation

Tools Required: OBD-II scanner, socket set, multimeter, transmission fluid dipstick, funnel.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the negative battery terminal to ensure safety.

2. Check and Replace Transmission Fluid

Remove the transmission fluid dipstick and inspect the fluid level and condition.
If low, add the correct type of transmission fluid (typically Honda ATF DW-1).
If the fluid is discolored or has a burnt smell, proceed to replace the fluid.
1. Drain Fluid:
  - Place a drain pan under the transmission pan.
  - Remove the transmission drain plug or pan bolts to drain old fluid.
2. Replace Filter (if applicable):
  - Remove the transmission pan and replace the filter.
  - Clean the pan and magnet, removing any debris.
3. Reassemble:
  - Reinstall the transmission pan with a new gasket.
  - Torque the pan bolts to the manufacturer's specifications.
  - Refill the transmission with new fluid through the dipstick tube using a funnel.

3. Inspect and Test Transmission Components

Tools Required: Multimeter, torque wrench.
Reconnect the battery terminal.
Test the transmission solenoids:
1. Disconnect the solenoid connectors.
2. Use a multimeter to measure resistance. Compare with specifications from the repair manual.
3. If any solenoid is faulty, replace it.
Recheck all connections and wiring related to the transmission control module for any damage.