why is my Honda CR-V Fifth Generation (2017-2022) shaking when I brake

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

551 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking when braking in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the braking system to prevent any electrical issues.
•Allow the vehicle to cool before working on the brakes to avoid burns.

Symptoms

•Shaking or vibrations in the steering wheel during braking
•Pulsating feel in the brake pedal
•Uneven wear on brake pads or rotors
•Increased stopping distance
•Possible noise (grinding or squeaking) when braking

Diagnostic Steps

1
Inspect the brake rotors for warping or uneven surface.
2
Check the brake pads for wear; look for thickness and condition.
3
Test the suspension components (e.g., control arms, bushings) for wear or damage.
4
Inspect wheel alignment and balance to rule out related issues.
5
Scan for error codes using an OBD-II scanner to check for any electronic brake system issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Floor jack
•Jack stands
•Lug wrench
•Socket set
•Torque wrench
•Brake caliper tool

Parts Required

•Brake rotors
•Brake pads

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the brake rotors for warping or uneven surface.
2
Check the brake pads for wear; look for thickness and condition.
3
Test the suspension components (e.g., control arms, bushings) for wear or damage.
4
Inspect wheel alignment and balance to rule out related issues.
5
Scan for error codes using an OBD-II scanner to check for any electronic brake system issues.

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface and the parking brake is engaged.
Wear safety goggles and gloves.

2. Raise the Vehicle

Use a floor jack to lift the front of the vehicle and secure it with jack stands.
Remove the front wheels using a lug wrench.

3. Inspect and Replace Brake Rotors

Inspect the Rotors:
- Check for any visible signs of warping or uneven surfaces.
Remove the Caliper:
- Use a socket set to remove the caliper mounting bolts.
- Carefully hang the caliper using a bungee cord or wire to avoid straining the brake line.
Remove the Rotor:
- Remove the retaining screws (if equipped) and slide the rotor off the hub.
Replace the Rotor:
- Install the new rotor, ensuring it is securely seated.
- Reattach any retaining screws.

4. Replace Brake Pads

Remove Old Brake Pads:
- Remove the caliper bracket if necessary and slide out the old brake pads.
Install New Brake Pads:
- Ensure the new pads are oriented correctly and slide them into place.
Reattach Caliper:
- Compress the caliper piston using a brake caliper tool if necessary, then reinstall the caliper over the new pads.

5. Reassemble and Lower the Vehicle

Reinstall the wheels and hand-tighten the lug nuts.
Lower the vehicle to the ground and torque the lug nuts to the manufacturer’s specifications using a torque wrench.

6. Test Drive

Start the vehicle and test the brakes at low speeds to ensure proper function and check for any vibrations.