why does my Honda CR-V make a clunking noise when turning

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

514 words

Problem Statement

Learn how to diagnose and fix clunking noise when turning in Honda CR-V. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Always use jack stands when working under the vehicle.

Symptoms

•Clunking noise during left or right turns
•Noise intensifies with sharper turns
•Possible vibration felt through the steering wheel
•Uneven tire wear
•Difficulty steering or a feeling of looseness in the steering

Diagnostic Steps

1
Inspect the CV joints for wear or damage.
2
Check the suspension components, including struts, shocks, and bushings, for any signs of wear.
3
Examine the wheel bearings for play or noise when rotating the wheel by hand.
4
Lift the vehicle and perform a visual inspection of the control arms and ball joints.
5
Test the steering rack for any looseness or abnormal movement.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Pry bar
•Wrench set
•Jack stands
•Impact wrench
•Bearing puller

Parts Required

•CV joint assembly (if damaged)
•Suspension bushings or struts (if worn)
•Wheel bearings (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the CV joints for wear or damage.
2
Check the suspension components, including struts, shocks, and bushings, for any signs of wear.
3
Examine the wheel bearings for play or noise when rotating the wheel by hand.
4
Lift the vehicle and perform a visual inspection of the control arms and ball joints.
5
Test the steering rack for any looseness or abnormal movement.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery to ensure safety while working on electrical components.

2. Inspect and Replace CV Joints

Tools Required: Socket set, torque wrench, pry bar
Using a socket set, remove the wheel on the affected side.
Inspect the CV joint boot for tears or leaks.
If damaged, remove the CV joint from the axle using a pry bar to release it from the hub.
Replace with a new CV joint assembly, ensuring proper alignment in the axle.

3. Examine and Replace Suspension Components

Tools Required: Wrench set, jack stands, impact wrench
Remove any necessary components to gain access to struts and control arms.
Inspect struts for leaks or damage; replace if necessary.
Check bushings for deterioration; if worn, replace with new bushings.
Reassemble and torque all bolts to manufacturer specifications.

4. Wheel Bearing Replacement (if necessary)

Tools Required: Bearing puller, hammer, socket set
Remove the wheel and brake components to access the hub.
Use a bearing puller to remove the old bearing from the hub assembly.
Install the new wheel bearing, ensuring it is seated correctly.
Reassemble the wheel and brake components.