how to reset the tire pressure light on Honda CR-V Sixth Generation (2023-present)

Honda CR-V Fifth Generation (2017-2022)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

425 words

Problem Statement

Learn how to reset the tire pressure light on your 2023 Honda CR-V. Follow our step-by-step guide to ensure your TPMS is functioning correctly.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked safely and securely before performing any tire pressure adjustments.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Inaccurate tire pressure readings displayed
•Potentially low tire pressure in one or more tires
•No other warning lights present

Diagnostic Steps

1
Verify that all tires, including the spare (if applicable), are inflated to the manufacturer-recommended pressure levels.
2
Check the tire pressure monitoring system for any error codes using an OBD-II scanner.
3
Inspect each tire for visible damage or punctures that may cause air loss.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge

Parts Required

•None required for reset; only for repairs if a tire or sensor is faulty.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: Tire pressure gauge
Ensure the vehicle is parked on a level surface and the ignition is in the OFF position.

2. Inflate Tires

Use a tire pressure gauge to measure the tire pressure of each tire.
Inflate any tire that is below the recommended pressure to the specified PSI as indicated on the driver's side door jamb.

3. Reset the TPMS

Turn the ignition switch to the ON position without starting the engine.
Locate the TPMS reset button, which is typically found beneath the steering column or to the right of the steering wheel.
Press and hold the TPMS reset button until the TPMS indicator blinks three times, then release the button.
Start the engine and allow the vehicle to run for a few minutes. The tire pressure light should turn off.

4. Verify Tire Pressure

After resetting the TPMS, double-check the tire pressures again to ensure they are at the correct levels.