FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022) - Honda CR-V
Home/Cars/Honda/CR-V/Fifth Generation (2017-2022)/how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022)

how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Fifth Generation (2017-2022)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
358 words

Problem Statement

Learn how to reset the maintenance light on Honda CR-V (2017-2022). Step-by-step guide to ensure your vehicle's maintenance reminder is cleared.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location and turned off before performing the reset.

Symptoms

  • •Maintenance light remains illuminated on the dashboard
  • •Reminder indicator persists after completing scheduled maintenance
  • •Owner's manual indicates a reset procedure is required

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •No specific tools required for this process.

Parts Required

  • •No parts required for the reset procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure all maintenance tasks (oil change, filter replacement, etc.) are complete.
  • Gather necessary tools and materials.
2. Reset the Maintenance Light

  1. Turn Off the Ignition

    • Ensure the vehicle is in the "OFF" position.

  2. Access the Reset Function

    • Press and hold the "SELECT/RESET" button located on the instrument panel.

  3. Turn to ON Position

    • While holding the "SELECT/RESET" button, turn the ignition key to the "ON" position (do not start the engine).

  4. Wait for the Light to Reset

    • Continue holding the "SELECT/RESET" button until the maintenance light blinks and then turns off (approximately 10 seconds).

  5. Finalize the Reset

    • Release the "SELECT/RESET" button and turn the ignition switch back to the "OFF" position.