how to reset the check engine light after fixing my Honda CR-V Fifth Generation (2017-2022)?

Honda CR-V Fifth Generation (2017-2022)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

410 words

Problem Statement

Learn how to reset the check engine light on your Honda CR-V (2017-2022) after fixing the underlying issue. Step-by-step guide included.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral with the parking brake engaged before starting the reset process.

Symptoms

•Check engine light is illuminated
•No noticeable performance issues (if fixed properly)
•OBD-II scanner shows no current error codes (if checked)

Diagnostic Steps

1
Ensure the underlying issue that triggered the check engine light has been properly resolved.
2
Connect an OBD-II scanner to the vehicle's OBD-II port.
3
Turn the ignition to the 'ON' position without starting the engine.
4
Access the check engine light reset function on the OBD-II scanner.
5
Follow the prompts on the scanner to clear the error codes.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None (if the underlying issue is resolved)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the underlying issue that triggered the check engine light has been properly resolved.
2
Connect an OBD-II scanner to the vehicle's OBD-II port.
3
Turn the ignition to the 'ON' position without starting the engine.
4
Access the check engine light reset function on the OBD-II scanner.
5
Follow the prompts on the scanner to clear the error codes.

Solution

1. Preparation

Gather necessary tools, including an OBD-II scanner.
Ensure the vehicle is parked on a level surface with the ignition off.

2. Connect OBD-II Scanner

Locate the OBD-II port, usually found under the dashboard near the driver's seat.
Plug the OBD-II scanner into the port securely.

3. Turn on Ignition

Insert the key into the ignition and turn it to the "ON" position (do not start the engine).
Ensure all dashboard lights illuminate to confirm power is on.

4. Access Reset Function

Power on the OBD-II scanner.
Navigate through the menu to find the option for "Erase Codes" or "Clear Codes."

5. Execute Code Reset

Confirm the selection to erase error codes.
Wait for the scanner to indicate that the codes have been cleared.

6. Disconnect Scanner

Remove the OBD-II scanner from the port.
Turn off the ignition.

7. Start the Engine

Start the engine and allow it to run for a few minutes.
Ensure the check engine light remains off.