how to replace the Honda CR-V Fifth Generation (2017-2022) brake pads

Honda CR-V Fifth Generation (2017-2022)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

556 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Step-by-step guide to replacing brake pads on Honda CR-V Fifth Generation (2017-2022). Learn symptoms, diagnostic steps, and safety tips.

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely supported on jack stands before working underneath.
•Always wear safety glasses and gloves when handling brake components.

Symptoms

•Squeaking or squealing noise when braking
•Vibration or pulsation in the brake pedal
•Warning light illuminated on the dashboard
•Reduced braking responsiveness
•Grinding noise indicating metal-to-metal contact

Diagnostic Steps

1
Inspect the brake pads visually for thickness and signs of wear.
2
Check the brake rotor condition for scoring or warping.
3
Verify brake fluid level and condition.
4
Listen for abnormal noises while manually actuating the brake pedal.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Socket set
•C-clamp
•Brake cleaner
•Bungee cord or rope

Parts Required

•New brake pads
•Brake grease

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: Jack, jack stands, lug wrench, socket set, C-clamp, brake cleaner, and a bungee cord or rope.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the negative battery terminal to prevent any electrical issues.

2. Lift the Vehicle

Use the lug wrench to loosen the lug nuts on the wheel where the brake pads will be replaced.
Raise the vehicle using a jack and secure it with jack stands.
Remove the wheel by fully unscrewing the lug nuts.

3. Remove the Brake Caliper

Locate the caliper bolts on the back of the brake caliper and remove them using the socket set.
Carefully slide the caliper off the brake rotor.
Use a bungee cord or rope to hang the caliper from the suspension (do not let it hang by the brake line).

4. Replace the Brake Pads

Remove the old brake pads from the caliper bracket.
Use a C-clamp to compress the caliper piston back into the caliper housing until it is fully retracted.
Clean the caliper bracket and apply brake grease to the backing of the new pads.
Install the new brake pads into the caliper bracket.

5. Reassemble the Brake System

Reposition the brake caliper over the new pads and align it with the rotor.
Reinstall and tighten the caliper bolts to the manufacturer’s specifications (typically 20-30 ft-lbs).
Reattach the wheel and hand-tighten the lug nuts.

6. Lower the Vehicle

Remove the jack stands and lower the vehicle back to the ground.
Tighten the lug nuts in a crisscross pattern to the specified torque (typically 80-100 ft-lbs).