how to fix the remote start not working on my Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Fifth Generation (2017-2022)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

554 words

Problem Statement

Learn how to diagnose and fix the remote start issue on your Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent short circuits.

Symptoms

•Remote start button on the key fob does not respond
•Dashboard lights do not illuminate when attempting to start remotely
•No engine cranking or starting sound
•Check engine light may be illuminated
•Security system indicator light may flash

Diagnostic Steps

1
Check the battery in the key fob to ensure it has sufficient charge.
2
Verify that the vehicle is within the remote start range (typically around 100-200 feet).
3
Look for any obstructions or interference that may affect the signal (e.g., metal objects, buildings).
4
Inspect the vehicle's ignition switch and key fob for any physical damage or wear.
5
Scan the vehicle using an OBD-II scanner for any error codes related to the engine or security system.
6
Confirm that all doors, hood, and trunk are securely closed, as open sensors can prevent remote starting.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Small screwdriver
•Basic hand tools

Parts Required

•Key fob battery (CR2032)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the battery in the key fob to ensure it has sufficient charge.
2
Verify that the vehicle is within the remote start range (typically around 100-200 feet).
3
Look for any obstructions or interference that may affect the signal (e.g., metal objects, buildings).
4
Inspect the vehicle's ignition switch and key fob for any physical damage or wear.
5
Scan the vehicle using an OBD-II scanner for any error codes related to the engine or security system.
6
Confirm that all doors, hood, and trunk are securely closed, as open sensors can prevent remote starting.

Solution

1. Preparation

Gather necessary tools including an OBD-II scanner and a multimeter.
Ensure the vehicle is parked in a safe and well-ventilated area.
Disconnect the battery to reset the vehicle’s electrical system (if necessary).

2. Replace Key Fob Battery

Tools Required: Small screwdriver, new battery (typically CR2032).
Remove the key fob cover using a small screwdriver.
Replace the old battery with a new one, ensuring the correct polarity.
Reassemble the fob and test the remote start function.

3. Check and Reset Vehicle Systems

Tools Required: OBD-II scanner.
Connect the OBD-II scanner to the vehicle’s diagnostic port.
Check for any error codes related to the remote start or security system.
If codes are found, clear them and test the remote start again.

4. Inspect Remote Start System

Tools Required: Multimeter, basic hand tools.
Remove any panels necessary to access the remote start module.
Use a multimeter to check for power and ground at the remote start module.
Ensure all connections are secure and free of corrosion. Repair or replace any damaged wiring.

5. Check Security System Settings

Ensure the vehicle's security system is functioning correctly, as an active alarm may prevent remote starting.
Consult the owner’s manual for instructions on disabling the alarm temporarily for testing purposes.