why does my Honda Civic 9th Generation (2012-2015) make a popping noise when turning

Honda Civic 9th Generation (2012-2015)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

497 words

Problem Statement

Discover how to diagnose and fix popping noise when turning in Honda Civic 9th Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Disconnect the battery before starting work on electrical components.

Symptoms

•Popping or clicking noise during turns
•Noise increases with speed
•Vibration felt through the steering wheel
•Uneven tire wear
•Difficulty steering or a loose feeling in the steering wheel

Diagnostic Steps

1
Inspect the front suspension components for visible wear or damage.
2
Check the CV joints and boots for tears or leaks.
3
Lift the vehicle and perform a shake test on the wheels to check for play in the wheel bearings.
4
Examine the steering rack and tie rod ends for looseness.
5
Use a stethoscope or mechanic’s listening tool to pinpoint the source of the noise during a slow turn.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack and jack stands
•Socket set
•Torque wrench
•CV joint puller (if necessary)

Parts Required

•CV joint or axle assembly
•Suspension bushings or ball joints (if required)
•Power steering fluid (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the front suspension components for visible wear or damage.
2
Check the CV joints and boots for tears or leaks.
3
Lift the vehicle and perform a shake test on the wheels to check for play in the wheel bearings.
4
Examine the steering rack and tie rod ends for looseness.
5
Use a stethoscope or mechanic’s listening tool to pinpoint the source of the noise during a slow turn.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a flat surface and engage the parking brake.
Disconnect the battery if working on electrical components.

2. Inspect and Replace CV Joints

Sub-steps:
1. Safely lift the vehicle and secure it with jack stands.
2. Remove the front wheel using a lug wrench.
3. Inspect the CV joint boots for tears; replace them if damaged.
4. If the CV joint is damaged, disconnect the axle from the wheel hub and the transmission.
5. Replace the CV joint with a new one, ensuring it is properly greased.
6. Reinstall the axle and torque to manufacturer specifications (typically 30-50 ft-lbs).
7. Reattach the wheel and lower the vehicle.

3. Check and Replace Suspension Components

Sub-steps:
1. Inspect the control arms, bushings, and ball joints for wear.
2. Replace any worn or damaged components with OEM parts.
3. Reassemble the suspension and ensure all bolts are torqued to specifications.

4. Steering System Inspection

Sub-steps:
1. Inspect the steering rack and tie rod ends for any signs of damage or play.
2. Tighten any loose connections; replace any damaged components if necessary.
3. Ensure the power steering fluid is at the correct level and in good condition.