FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda Civic 9th Generation (2012-2015) engine light come on and off - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/why does my Honda Civic 9th Generation (2012-2015) engine light come on and off

why does my Honda Civic 9th Generation (2012-2015) engine light come on and off

Honda Civic 9th Generation (2012-2015)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
532 words

Problem Statement

Learn how to diagnose and fix the intermittent engine light issue in Honda Civic 9th Generation (2012-2015). Step-by-step guide with diagnostic procedures.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Allow the engine to cool before inspecting or removing components.

Symptoms

  • •Check engine light illuminated intermittently
  • •Engine may run rough or misfire
  • •Decreased fuel efficiency
  • •Unusual noises from the engine compartment
  • •Difficulty starting the engine at times
  • •Poor performance during acceleration

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Fuel pressure gauge
  • •Screwdrivers

Parts Required

  • •New spark plugs
  • •Air filter (if necessary)
  • •Fuel filter (if necessary)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is off.
  • Disconnect the negative battery terminal to prevent electrical issues.
2. Scan and Clear Codes
  • Connect the OBD-II scanner to the vehicle's diagnostic port.
  • Turn the ignition to the "ON" position without starting the engine.
  • Read and note any trouble codes.
  • Clear the codes to reset the engine light.
3. Inspect and Replace Spark Plugs
  • Remove the ignition coil cover (if applicable) using a socket set.
  • Carefully remove the ignition coils from the spark plugs.
  • Remove old spark plugs using a spark plug socket and inspect for wear.
  • Install new spark plugs with a torque specification of 13 lb-ft (17.6 Nm).
4. Check Fuel System
  • Connect the fuel pressure gauge to the fuel rail.
  • Turn the ignition to "ON" (do not start) to check the pressure.
  • Ensure the pressure meets manufacturer specifications (typically around 40-50 psi).
  • If pressure is low, inspect the fuel pump and filter for issues.
5. Inspect Air Intake System
  • Inspect the air filter and replace it if dirty.
  • Check for any cracks or leaks in the air intake hoses.
  • Ensure the Mass Air Flow (MAF) sensor is clean and functioning properly.
6. Test Drive and Recheck Codes
  • Reconnect the negative battery terminal.
  • Start the engine and take the vehicle for a short test drive.
  • After driving, recheck for any stored or pending codes.