my Honda Civic 9th Generation (2012-2015) headlights won't turn on what's the cause

Honda Civic 9th Generation (2012-2015)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

465 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix headlights not working in Honda Civic 9th Generation (2012-2015). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems

Symptoms

•Headlight switch does not illuminate
•No low or high beam operation
•Dashboard indicators for headlights are off
•Possible flickering or intermittent operation prior to failure
•Fog lights or daytime running lights may also be inoperative

Diagnostic Steps

1
Inspect the headlight switch for proper operation
2
Check the vehicle's fuse box for blown fuses related to the headlights
3
Test headlight bulbs to ensure they are not burnt out
4
Use a multimeter to check for voltage at the headlight connector
5
Inspect wiring harness and connectors for damage or corrosion
6
Verify the operation of the relay controlling the headlights

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•Socket set
•Fuse puller
•Pliers

Parts Required

•Headlight bulbs (if burnt out)
•Replacement fuses (if blown)
•Replacement relay (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the headlight switch for proper operation
2
Check the vehicle's fuse box for blown fuses related to the headlights
3
Test headlight bulbs to ensure they are not burnt out
4
Use a multimeter to check for voltage at the headlight connector
5
Inspect wiring harness and connectors for damage or corrosion
6
Verify the operation of the relay controlling the headlights

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal to avoid electrical shock.

2. Inspect and Replace Fuses

Locate the fuse box, usually found under the dashboard or in the engine compartment.
Identify the headlight fuse using the diagram on the fuse box cover.
Remove the fuse using a fuse puller or pliers.
Check the fuse for continuity; replace if blown with a fuse of the same amperage.

3. Check and Replace Headlight Bulbs

Open the hood and locate the headlight assembly.
Remove the headlight bulb socket by turning it counterclockwise.
Carefully pull out the old bulb and inspect it for filament breaks.
Insert a new bulb (ensure it’s the correct type) into the socket and secure it.

4. Test and Replace Relay

Locate the relay for the headlights in the fuse box.
Use a multimeter to test the relay for proper function.
If faulty, replace the relay with a new one.

5. Inspect Wiring and Connectors

Visually inspect the wiring harness for any signs of wear, fraying, or corrosion.
Clean any corroded connectors with electrical contact cleaner.
Ensure all connections are secure.

6. Reconnect Battery and Test

Reconnect the negative battery terminal.
Turn on the headlights to verify functionality.