FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 9th Generation (2012-2015) has a warning light for the oil pressure, what does that m... - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/my Honda Civic 9th Generation (2012-2015) has a warning light for the oil pressure, what does that m...

my Honda Civic 9th Generation (2012-2015) has a warning light for the oil pressure, what does that m...

Honda Civic 9th Generation (2012-2015)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
600 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the oil pressure warning light issue in Honda Civic 9th Generation (2012-2015). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical components.
  • •Allow the engine to cool before opening the oil filler cap or working on the oil pressure sending unit.

Symptoms

  • •Oil pressure warning light illuminated on the dashboard
  • •Engine noise may increase due to inadequate lubrication
  • •Possible engine stalling or rough idling
  • •Oil leaking under the vehicle
  • •Decreased engine performance or power

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Wrench set
  • •Mechanical oil pressure gauge
  • •Oil catch pan
  • •Funnel

Parts Required

  • •Engine oil (according to specifications)
  • •Oil pressure sending unit (if faulty)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery to avoid electrical issues while working on the oil pressure sending unit.
2. Check and Top Off Engine Oil
  • Tools Required: Socket set, oil catch pan, funnel, and fresh engine oil.
  • Remove the oil filler cap.
  • If the oil level is low, top it off with the recommended engine oil type (check owner's manual for specifications).
  • Replace the oil filler cap securely.
3. Inspect and Replace Oil Pressure Sending Unit
  • Tools Required: Wrench set, oil catch pan, and new oil pressure sending unit.
  • Locate the oil pressure sending unit (usually near the oil filter).
  • Place the oil catch pan underneath to catch any oil that may spill.
  • Remove the electrical connector from the sender.
  • Using a wrench, unscrew the old oil pressure sending unit and replace it with the new one, tightening it to the manufacturer’s specifications (usually around 12-15 ft-lbs).
  • Reattach the electrical connector.
4. Test Oil Pressure
  • Tools Required: Mechanical oil pressure gauge.
  • Remove the oil pressure sending unit again if necessary.
  • Install the mechanical oil pressure gauge in its place.
  • Start the engine and observe the pressure reading on the gauge.
  • It should fall within the manufacturer's specified range (usually between 10-80 psi, depending on engine speed).
  • If pressure is low, further investigation into oil pump functionality may be needed.
5. Reassemble and Final Checks
  • If the oil pressure is normal, reinstall the oil pressure sending unit.
  • Reconnect the battery.
  • Start the engine and monitor for oil pressure warning light and leaks.