how to reset the tire pressure light on my Honda Civic 9th Generation (2012-2015)?

Honda Civic 9th Generation (2012-2015)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

385 words

Problem Statement

Learn how to reset the tire pressure light on your Honda Civic 9th Generation (2012-2015). Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a flat surface when checking tire pressures.

Symptoms

•Tire pressure light is illuminated on the dashboard
•Possible warning message about low tire pressure
•Indication of individual tire pressure readings may be incorrect
•Unusual tire wear may be observed if the issue persists

Diagnostic Steps

1
Check the tire pressures of all tires, including the spare, using a tire pressure gauge.
2
Inflate any under-inflated tires to the recommended pressure stated on the door jamb placard.
3
Verify if the tire pressure light remains illuminated after correcting tire pressures.
4
If the light is still on, consult the owner's manual for TPMS reset procedure specific to the model.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Air compressor

Parts Required

•None required for reset, but ensure tires are properly inflated.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the tire pressures of all tires, including the spare, using a tire pressure gauge.
2
Inflate any under-inflated tires to the recommended pressure stated on the door jamb placard.
3
Verify if the tire pressure light remains illuminated after correcting tire pressures.
4
If the light is still on, consult the owner's manual for TPMS reset procedure specific to the model.

Solution

1. Preparation

Ensure all tires are inflated to the proper pressure as indicated on the placard.
Gather necessary tools: tire pressure gauge, air compressor (if needed).

2. Reset the TPMS

Locate the TPMS reset button: The button is usually located beneath the steering column near the brake pedal.
Turn the ignition switch to the ON position (do not start the engine).
Press and hold the TPMS reset button until the TPMS indicator blinks three times, then release it.
Start the engine: Allow the vehicle to run for a few minutes to ensure the system recalibrates.

3. Verify Reset

After a few minutes of driving, check to see if the TPMS light has turned off. If it remains on, repeat the reset procedure.