how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes

Less than 15 minutes

Time

easy

Difficulty

low

Severity

2 min read

334 words

Problem Statement

Learn how to reset the maintenance light on your 2012-2015 Honda Civic 9th Generation. Follow our step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

Less than 15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position and the engine is off while performing the reset.

Symptoms

•Maintenance light remains illuminated on the dashboard
•No other warning lights are active
•Vehicle runs smoothly with no performance issues

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Locate the odometer/trip button on the dashboard.
3
Check if the maintenance light is still on before proceeding to reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No specific tools required

Parts Required

•No parts required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked and the engine is off.
Gather the necessary tools: no specific tools are required for this reset.

2. Turn the Ignition On

Insert the key into the ignition and turn it to the "On" position (do not start the engine).

3. Reset the Maintenance Light

Press and hold the odometer/trip button.
While holding the button, turn the ignition off and then back to the "On" position.
Continue to hold the odometer/trip button until the maintenance light resets, which typically takes about 10 seconds.
Release the button once the maintenance light blinks and turns off.

4. Verify the Reset

Turn the ignition off and then back on to ensure the maintenance light is no longer illuminated.