FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

Honda Civic 9th Generation (2012-2015)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
365 words

Problem Statement

Learn how to reset the maintenance light on Honda Civic 9th Generation (2012-2015) with this step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location and the engine is off during the reset process.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other warning lights present
  • •Engine running smoothly after maintenance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flathead screwdriver

Parts Required

  • •None.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely and the engine is off.
  • Gather necessary tools, such as a flathead screwdriver (if needed to access the trip button).
2. Ignition Position
  1. Insert the key into the ignition.
  2. Turn the ignition switch to the "ON" position (do not start the engine).
3. Display Selection
  1. Check that the odometer is displayed. If it is not, press the trip button until the odometer shows.
4. Ignition Off
  1. Turn the ignition switch to the "OFF" position.
5. Resetting the Maintenance Light
  1. Press and hold the "Trip" button on the dashboard.
  2. While holding the "Trip" button, turn the ignition switch back to the "ON" position.
  3. Continue to hold the "Trip" button until the maintenance light blinks and then turns off.
6. Final Check
  1. Release the "Trip" button.
  2. Turn the ignition off and then back on to verify that the maintenance light is no longer illuminated.