FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix my Honda Civic that won't accelerate when the gas pedal is pressed? - Honda Civic
Home/Cars/Honda/Civic/9th Generation (2012-2015)/how to fix my Honda Civic that won't accelerate when the gas pedal is pressed?

how to fix my Honda Civic that won't accelerate when the gas pedal is pressed?

Honda Civic 9th Generation (2012-2015)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
680 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix acceleration issues in Honda Civic. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before starting repairs.

Symptoms

  • •Engine RPM does not increase when gas pedal is pressed
  • •Vehicle feels sluggish and does not respond to throttle input
  • •Possible check engine light illuminated
  • •Engine stalling or hesitation during acceleration
  • •Unusual noises from the engine compartment
  • •Poor fuel economy recently observed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Multimeter
  • •Socket set
  • •Torque wrench

Parts Required

  • •Throttle cable (if damaged)
  • •Fuel filter (if needed)
  • •Spark plugs (if worn)
  • •Mass airflow sensor (if faulty)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the negative battery terminal to ensure safety during the repair.
2. Inspect and Repair Throttle Cable
  1. Locate the throttle cable attached to the accelerator pedal and throttle body.
  2. Check for fraying, binding, or other damage.
  3. If damaged, replace the throttle cable by removing the clips and disconnecting it from both the accelerator pedal and throttle body.
  4. Install the new throttle cable by reversing the removal steps and ensuring it is properly adjusted.
3. Fuel System Check
  1. Reconnect the battery and start the engine.
  2. Attach the fuel pressure gauge to the fuel rail’s test port.
  3. Turn the ignition to the "on" position (without starting the engine) to check the fuel pressure reading.
  4. Compare the reading to the manufacturer's specification (typically around 40-50 psi for most Civics). If low, inspect the fuel pump, fuel filter, and fuel lines for blockages or failures.
  5. Replace the fuel filter if necessary and ensure the fuel pump is functioning by checking for abnormal noises or insufficient pressure.
4. Airflow and Ignition System Check
  1. Remove and inspect the air filter. Replace it if it is dirty or clogged.
  2. Check the spark plugs for wear or fouling. Replace them if they appear worn or are not properly gapped.
  3. Inspect ignition coils for proper function. Replace any faulty coils.
5. MAF Sensor Testing
  1. Locate the MAF sensor, usually positioned between the air filter and throttle body.
  2. Disconnect the electrical connector and remove the sensor from the intake.
  3. Clean the MAF sensor with MAF cleaner and reassemble.
  4. If necessary, replace the MAF sensor with a new one if cleaning does not resolve the issue.