how to fix Honda Civic 9th Generation (2012-2015) engine oil consumption problem

Honda Civic 9th Generation (2012-2015)

Error Codes

4-8 hours

Time

hard

Difficulty

high

Severity

3 min read

499 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix excessive engine oil consumption in Honda Civic 9th Generation (2012-2015). Step-by-step guide with symptoms and solutions.

Affected Component

Engine

Estimated Time

4-8 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the oil pan or working on engine components.

Symptoms

•Engine oil level drops significantly between oil changes
•Blue smoke from the exhaust during acceleration
•Engine misfires or rough idling
•Increased engine noise due to insufficient lubrication
•Check engine light illuminated with relevant fault codes

Diagnostic Steps

1
Check the engine oil level using the dipstick to confirm consumption.
2
Inspect for visible oil leaks around the engine and undercarriage.
3
Conduct a compression test to evaluate engine cylinder integrity.
4
Perform a leak-down test to check for internal engine issues.
5
Use an OBD-II scanner to check for any stored fault codes related to the engine.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Pliers
•Engine hoist
•Torque wrench
•Piston ring compressor
•Valve spring compressor
•OBD-II scanner

Parts Required

•PCV valve
•Oil control rings
•Valve seals
•Engine oil

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the engine oil level using the dipstick to confirm consumption.
2
Inspect for visible oil leaks around the engine and undercarriage.
3
Conduct a compression test to evaluate engine cylinder integrity.
4
Perform a leak-down test to check for internal engine issues.
5
Use an OBD-II scanner to check for any stored fault codes related to the engine.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the engine is cool and parked on a level surface.
Disconnect the battery for safety.

2. Inspect and Replace PCV Valve

Tools Required: Socket set, pliers
Remove the PCV valve from the engine.
Inspect the PCV valve for clogs or malfunction.
Replace with a new PCV valve if necessary.

3. Replace Oil Control Rings

Tools Required: Engine hoist, socket set, torque wrench, piston ring compressor
Drain the engine oil and remove the oil pan.
Remove the cylinder head and disconnect any necessary components (like the intake and exhaust manifolds).
Remove the pistons from the engine block.
Replace the oil control rings on each piston using a piston ring compressor.
Reassemble the engine, ensuring proper torque specifications for all bolts.

4. Check and Repair Valve Seals

Tools Required: Valve spring compressor, socket set
Remove the cylinder head cover.
Use a valve spring compressor to remove valve springs and retainers.
Inspect and replace valve seals as needed.
Reassemble the cylinder head with a new gasket.

5. Refill Engine Oil

Reinstall the oil pan and refill the engine with the manufacturer-recommended oil type and capacity.