why do my Honda Civic wipers not work on certain speeds

Honda Civic 11th Generation (2022-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

452 words

Problem Statement

Learn how to diagnose and fix Honda Civic wipers not working on certain speeds. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before working on components near the engine.

Symptoms

•Wipers do not operate on low speed
•Wipers do not operate on high speed
•Wipers function correctly on intermittent speed
•Wiper motor makes noise when trying to operate
•Wiper switch feels loose or unresponsive

Diagnostic Steps

1
Inspect the wiper switch for damage or wear.
2
Use an OBD-II scanner to check for any related error codes.
3
Test the voltage at the wiper motor connector using a multimeter.
4
Check the wiper relay for proper operation.
5
Inspect the wiper motor for signs of wear or damage.
6
Verify the condition of the wiper fuse and replace if necessary.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdriver set
•Wiper puller tool

Parts Required

•Wiper motor (if faulty)
•Wiper switch (if faulty)
•Wiper relay (if faulty)
•Fuses (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the wiper switch for damage or wear.
2
Use an OBD-II scanner to check for any related error codes.
3
Test the voltage at the wiper motor connector using a multimeter.
4
Check the wiper relay for proper operation.
5
Inspect the wiper motor for signs of wear or damage.
6
Verify the condition of the wiper fuse and replace if necessary.

Solution

1. Preparation

Gather tools and parts required for the repair.
Disconnect the negative battery terminal to ensure safety.

2. Wiper Relay Inspection

Locate the wiper relay in the fuse box.
Remove the relay and test it using a multimeter for continuity.
If the relay is faulty, replace it with a new one.

3. Wiper Switch Replacement (if necessary)

Remove the steering column cover to access the wiper switch.
Disconnect the wiring harness from the old switch.
Install the new wiper switch and reconnect the wiring harness.
Reassemble the steering column cover.

4. Wiper Motor Inspection

Remove the wiper arms from the pivot points using a puller tool if necessary.
Unscrew and remove the motor from its mounting location.
Inspect the motor for corrosion or damage.
If damaged, replace the wiper motor with a new one and reassemble.

5. Reassembly and Testing

Reinstall the wiper arms onto the pivot points.
Reconnect the battery terminal.
Test the wiper speeds to ensure all settings are functioning correctly.