how to reset the maintenance light on my Honda Civic 10th Generation (2016-2021)

Honda Civic 11th Generation (2022-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

375 words

Problem Statement

Learn how to reset the maintenance light on your Honda Civic 10th Generation (2016-2021) with this step-by-step guide. Quick and easy process.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position while performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard
•Reminder for scheduled maintenance displayed
•No other engine or vehicle-related symptoms

Diagnostic Steps

1
Ensure the vehicle is in the OFF position.
2
Press and hold the odometer/ trip button on the dashboard.
3
Turn the ignition to the ON position without starting the engine.
4
Continue holding the odometer/ trip button until the maintenance light blinks and resets.
5
Release the odometer/ trip button, and turn the ignition back to the OFF position.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the OFF position.
2
Press and hold the odometer/ trip button on the dashboard.
3
Turn the ignition to the ON position without starting the engine.
4
Continue holding the odometer/ trip button until the maintenance light blinks and resets.
5
Release the odometer/ trip button, and turn the ignition back to the OFF position.

Solution

1. Preparation

Make sure the vehicle is parked on a level surface.
Ensure the ignition key is in your hand and the vehicle is turned OFF.

2. Reset Process

Locate the Odometer/Trip Button
- Find the button usually located on the instrument cluster near the odometer display.
Press and Hold the Odometer/Trip Button
- With the vehicle OFF, press and hold the odometer/trip button.
Turn Ignition ON
- While still holding the button, turn the ignition key to the ON position (do not start the engine).
Wait for the Maintenance Light to Blink
- Keep holding the button until the maintenance light begins to blink, then turns OFF. This usually takes around 10-15 seconds.
Release the Button and Turn Off Ignition
- Release the odometer/trip button and turn the ignition OFF.

3. Confirm Reset

Turn the ignition back ON to check if the maintenance light is OFF.