how to fix P0700 code in Honda Civic 9th Generation (2012-2015)

Honda Civic 11th Generation (2022-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

556 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0700 transmission control system malfunction in Honda Civic 2012-2015. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the vehicle to cool before servicing the transmission.

Symptoms

•Check engine light illuminated
•Slipping transmission or harsh shifting
•Transmission failure to engage in gear
•Poor acceleration performance
•Unusual noises from the transmission area
•Decreased fuel efficiency

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics using an OBD-II scanner to confirm the P0700 code and check for any additional codes related to the transmission.
2
Inspect the transmission fluid level and condition; look for contamination or burnt fluid.
3
Check the wiring and connectors leading to the TCM for signs of damage or corrosion.
4
Test the TCM for proper voltage and communication with other modules.
5
Inspect the transmission range sensor (neutral safety switch) for proper operation.
6
Evaluate the vehicle's battery and charging system to ensure proper voltage supply.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Wire strippers
•Electrical tape
•Soldering iron (if needed)
•Drain pan
•Funnel

Parts Required

•Transmission control module (if needed)
•Transmission fluid
•Transmission range sensor (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics using an OBD-II scanner to confirm the P0700 code and check for any additional codes related to the transmission.
2
Inspect the transmission fluid level and condition; look for contamination or burnt fluid.
3
Check the wiring and connectors leading to the TCM for signs of damage or corrosion.
4
Test the TCM for proper voltage and communication with other modules.
5
Inspect the transmission range sensor (neutral safety switch) for proper operation.
6
Evaluate the vehicle's battery and charging system to ensure proper voltage supply.

Solution

1. Preparation

Gather all necessary tools and parts.
Disconnect the vehicle battery to ensure safety while working on electrical components.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission fluid dipstick and check the fluid level.
2. If fluid is low, add the manufacturer-recommended transmission fluid.
3. If fluid is discolored or burnt, drain and replace the fluid.
Tools Required: Transmission fluid, funnel, drain pan.

3. Inspect and Repair Wiring

Sub-steps:
1. Visually inspect wiring harnesses and connectors to the TCM and transmission range sensor.
2. Repair or replace any damaged wires or corroded connectors.
Tools Required: Wire strippers, electrical tape, soldering iron (if needed).

4. Replace Transmission Control Module (if necessary)

Sub-steps:
1. Locate the TCM, typically found near the transmission or under the dashboard.
2. Disconnect the wiring harness from the TCM.
3. Remove the TCM mounting bolts and take out the module.
4. Install the new TCM and secure it with bolts.
5. Reconnect the wiring harness.
Tools Required: Socket set, ratchet.

5. Check Transmission Range Sensor

Sub-steps:
1. Locate the transmission range sensor.
2. Inspect its connector and wiring for damage.
3. Test the sensor with a multimeter to ensure proper operation; replace if faulty.
Tools Required: Multimeter, socket set.