FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
what causes my Honda Civic to stall while driving - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/what causes my Honda Civic to stall while driving

what causes my Honda Civic to stall while driving

Honda Civic 10th Generation (2016-2021)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
634 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix stalling issues in Honda Civic. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Relieve fuel pressure before disconnecting fuel lines

Symptoms

  • •Engine unexpectedly shuts off while in motion
  • •Check engine light illuminated
  • •Rough idle or hesitation prior to stalling
  • •Difficulty restarting after stalling
  • •Loss of power during acceleration
  • •Increased engine temperature before stalling

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Socket set
  • •Line wrenches
  • •Multimeter
  • •MAF cleaner spray

Parts Required

  • •Fuel pump (if faulty)
  • •Fuel filter
  • •Spark plugs
  • •Ignition coils (if faulty)
  • •Air filter

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and engage the parking brake.
  • Disconnect the battery negative terminal to ensure safety during repairs.
2. Inspect and Repair the Fuel System

  1. Check Fuel Pump Operation

    • Connect a fuel pressure gauge to the fuel rail.
    • Turn the ignition to the "On" position without starting the engine.
    • The gauge should read the manufacturer's specified pressure (usually between 40-50 psi). If not, replace the fuel pump.

  2. Replace Fuel Filter

    • Locate the fuel filter, usually along the fuel line, and relieve fuel pressure.
    • Disconnect the fuel lines from the filter, using appropriate line wrenches.
    • Install the new filter in the correct orientation and reconnect the fuel lines securely.
3. Inspect and Repair the Ignition System
  1. Check Spark Plugs and Coils
    • Remove the spark plugs using a socket set and inspect for wear or carbon buildup.
    • If necessary, replace with new plugs, ensuring to gap them correctly as per specifications.
    • Test each ignition coil for resistance and replace any faulty coils.
4. Clean Air Intake and Replace Sensors

  1. Inspect and Clean MAF Sensor

    • Remove the MAF sensor from the air intake duct.
    • Clean the sensor with MAF cleaner spray; do not touch the sensor element.
    • Reinstall the sensor and ensure all connections are secure.

  2. Check Air Filter and Intake Duct

    • Remove the air filter and inspect for dirt and debris.
    • Replace the air filter if clogged.
    • Check for any cracks or loose connections in the intake duct.
5. Reconnect Battery and Test
  • Reconnect the battery terminal and clear any existing error codes with the OBD-II scanner.
  • Start the vehicle and allow it to idle, monitoring for any unusual behavior.