how to reset the oil light on my Honda Civic 10th Generation (2016-2021)

Honda Civic 10th Generation (2016-2021)

Error Codes

10 minutes

Time

easy

Difficulty

low

Severity

2 min read

318 words

Problem Statement

Learn how to reset the oil light on your Honda Civic 10th Generation (2016-2021) after an oil change. Step-by-step guide for quick and easy reset.

Affected Component

Electrical

Estimated Time

10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

•Oil light remains illuminated on the dashboard
•Warning messages related to oil maintenance appear
•Engine oil has been changed recently, but the light is still on

Diagnostic Steps

1
Ensure the engine is turned off and the key is removed from the ignition.
2
Turn the ignition to the 'ON' position without starting the engine.
3
Press the gas pedal three times within 5 seconds.
4
Turn the ignition off, then start the engine to check if the oil light is reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: None required for this task.
Ensure the vehicle is parked on a flat surface and the engine is off.

2. Access the Ignition

Insert the key into the ignition and turn it to the "ON" position (do not start the engine).

3. Reset the Oil Light

Quickly press the gas pedal three times within 5 seconds.
Turn the ignition off completely.

4. Verify Reset

Start the engine to confirm the oil light has been reset. The light should no longer be illuminated.