how to reset the maintenance light on Honda Civic 9th Generation (2012-2015)

Honda Civic 10th Generation (2016-2021)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

383 words

Problem Statement

Learn how to reset the maintenance light on your 2012-2015 Honda Civic 9th Generation. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or securely in gear before attempting to reset the maintenance light.

Symptoms

•Maintenance light remains illuminated on the dashboard
•Potential notifications for oil change or service due
•No change in driving performance

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the 'Select/Reset' button on the instrument panel.
3
Press the 'Select/Reset' button repeatedly until the 'Oil Life' indicator is displayed.
4
Hold the 'Select/Reset' button for about 10 seconds until the maintenance light begins to blink.
5
Release the button and then press it again to confirm the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No special tools required

Parts Required

•No parts required for resetting the maintenance light

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the 'Select/Reset' button on the instrument panel.
3
Press the 'Select/Reset' button repeatedly until the 'Oil Life' indicator is displayed.
4
Hold the 'Select/Reset' button for about 10 seconds until the maintenance light begins to blink.
5
Release the button and then press it again to confirm the reset.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Insert the key into the ignition or have the key fob present for push-start models.

2. Ignition Position

Turn the ignition switch to the "ON" position (do not start the engine).
Verify that all dashboard lights are operational.

3. Resetting the Oil Life

Locate the "Select/Reset" button, usually on the dashboard near the speedometer.
Press the "Select/Reset" button multiple times until the "Oil Life" status is displayed.

4. Confirming the Reset

Hold the "Select/Reset" button for approximately 10 seconds until the maintenance light begins to blink.
After blinking, release the button and press it once again to confirm the reset.

5. Final Check

Turn off the ignition and start the engine to ensure the maintenance light is no longer illuminated.