why does my Honda Accord have excessive oil consumption?

Honda Accord 9th Generation (2013-2017)

Error Codes

4-8 hours

Time

hard

Difficulty

high

Severity

3 min read

492 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix excessive oil consumption in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

4-8 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the oil pan.

Symptoms

•Check engine light illuminated
•Blue smoke from the exhaust during acceleration
•Frequent need to add oil between changes
•Engine misfire or rough running
•Oil leaks around engine components

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any related issues.
2
Inspect the engine oil level and condition using the dipstick.
3
Check for visible oil leaks under the vehicle and around engine components.
4
Remove the spark plugs and inspect for oil fouling.
5
Perform a compression test to assess the engine's internal condition.
6
Verify the condition of the PCV (Positive Crankcase Ventilation) system for blockages.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Valve spring compressor
•Compression tester

Parts Required

•Valve seals
•Piston rings
•Gasket set
•PCV valve and hoses

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any related issues.
2
Inspect the engine oil level and condition using the dipstick.
3
Check for visible oil leaks under the vehicle and around engine components.
4
Remove the spark plugs and inspect for oil fouling.
5
Perform a compression test to assess the engine's internal condition.
6
Verify the condition of the PCV (Positive Crankcase Ventilation) system for blockages.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the engine is cool.
Disconnect the battery to prevent electrical issues.

2. Replace Worn Valve Seals

Remove the valve cover:
- Use a socket set to unscrew the valve cover bolts.
- Carefully lift the cover and inspect the gasket; replace if damaged.
Replace valve seals:
- Remove the springs using a valve spring compressor.
- Replace old valve seals with new ones.
- Reassemble the springs and ensure they are seated correctly.

3. Address Piston Ring Wear

Remove the oil pan:
- Support the engine if necessary and remove the bolts holding the oil pan.
- Carefully lower the pan and inspect for metal shavings.
Replace piston rings:
- Remove the cylinder head and disconnect any necessary components (fuel lines, electrical connectors).
- Remove the pistons from the cylinders, replace the rings, and reinstall the pistons.
- Reassemble the cylinder head, ensuring proper torque specifications are followed.

4. Clean or Replace PCV System

Inspect the PCV valve:
- Remove the PCV valve from the valve cover.
- Check for blockages; clean or replace if necessary.
Inspect hoses:
- Check for cracks or leaks in the hoses connected to the PCV system and replace if needed.