my Honda Accord rearview camera not working, what can I do?

Honda Accord 9th Generation (2013-2017)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

497 words

Problem Statement

Learn how to diagnose and fix the rearview camera issue in your Honda Accord. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to avoid short circuits or shocks.

Symptoms

•Rearview camera display is blank or not activating
•Error message on the infotainment system regarding the camera
•No image displayed on the screen when the vehicle is in reverse
•Physical damage to the camera lens or housing (if visible)
•Intermittent functionality where the camera works sporadically

Diagnostic Steps

1
Inspect the rearview camera for any visible damage or obstruction.
2
Check the vehicle's fuse box for any blown fuses related to the rear camera system.
3
Use an OBD-II scanner to check for any error codes related to the camera or infotainment system.
4
Verify camera connections by inspecting the wiring harness for loose or damaged connections.
5
Test the camera output with a multimeter to ensure it is receiving power.
6
Check the settings on the infotainment system to ensure the camera is enabled.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdriver set
•Socket set
•Trim removal tool

Parts Required

•Rearview camera (if replacement is necessary)
•Fuse (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Rearview camera display is blank or not activating

•Error message on the infotainment system regarding the camera

•No image displayed on the screen when the vehicle is in reverse

•Physical damage to the camera lens or housing (if visible)

•Intermittent functionality where the camera works sporadically

Diagnostic Steps

1
Inspect the rearview camera for any visible damage or obstruction.
2
Check the vehicle's fuse box for any blown fuses related to the rear camera system.
3
Use an OBD-II scanner to check for any error codes related to the camera or infotainment system.
4
Verify camera connections by inspecting the wiring harness for loose or damaged connections.
5
Test the camera output with a multimeter to ensure it is receiving power.
6
Check the settings on the infotainment system to ensure the camera is enabled.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the vehicle battery to ensure safety while working on electrical components.

2. Inspect and Clean Camera

Remove any debris or dirt from the camera lens using a soft cloth.
If the lens is cracked or damaged, proceed to replace the camera.

3. Replace the Rearview Camera (if necessary)

Tools Required:
- Screwdriver set
- Socket set
- Trim removal tool
Remove the interior trim panel covering the rearview camera (if applicable).
Disconnect the wiring harness from the old camera.
Remove the camera mounting screws and take out the old camera.
Install the new rearview camera in the reverse order:
- Secure the new camera with mounting screws.
- Reconnect the wiring harness.
- Reinstall the interior trim panel.

4. Check and Replace Fuse (if necessary)

Locate the fuse box and identify the fuse that corresponds to the rearview camera.
Inspect the fuse for continuity using a multimeter.
If blown, replace it with a fuse of the same amperage rating.

5. Reconnect Battery and Test

Reconnect the vehicle battery.
Start the vehicle and shift into reverse to check if the camera activates.