my Honda Accord is shaking when I accelerate, what could be wrong?

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

486 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a flat surface and securely supported before working underneath.
•Disconnect the battery before working on electrical components or engine mounts.

Symptoms

•Vehicle shakes or vibrates during acceleration
•Steering wheel vibrations
•Possible loss of power or acceleration
•Unusual noises (clunking or grinding) while accelerating
•Uneven tire wear

Diagnostic Steps

1
Inspect tires for proper inflation and tread wear.
2
Check wheel alignment and balance.
3
Examine suspension components for wear or damage (e.g., control arms, bushings).
4
Test engine mounts for excessive movement or damage.
5
Scan for error codes using an OBD-II scanner to check for related engine issues.
6
Inspect the driveshaft and CV joints for any signs of damage or wear.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Tire inflator
•Tread depth gauge
•Jack
•Jack stands
•Socket set
•Torque wrench
•Alignment machine (professional service)

Parts Required

•Tires (if replacement is necessary)
•Suspension components (if worn)
•Engine mounts (if damaged)
•CV joints (if defective)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for proper inflation and tread wear.
2
Check wheel alignment and balance.
3
Examine suspension components for wear or damage (e.g., control arms, bushings).
4
Test engine mounts for excessive movement or damage.
5
Scan for error codes using an OBD-II scanner to check for related engine issues.
6
Inspect the driveshaft and CV joints for any signs of damage or wear.

Solution

1. Tire Inspection and Maintenance

Sub-steps:
- Check tire pressure with a tire pressure gauge; inflate to manufacturer's specifications if necessary.
- Inspect tread depth and look for uneven wear patterns; rotate or replace tires if needed.
Tools Required: Tire pressure gauge, tire inflator, tread depth gauge.

2. Wheel Alignment and Balancing

Sub-steps:
- Take the vehicle to a professional shop for a wheel alignment and balancing.
- Ensure that all wheels are properly balanced to eliminate vibrations during acceleration.
Tools Required: Alignment machine (professional service).

3. Suspension Inspection

Sub-steps:
- Lift the vehicle using a jack and secure it on jack stands.
- Visually inspect control arms, bushings, and struts for wear or damage.
- Replace any worn components as necessary, ensuring all fasteners are torqued to manufacturer specifications.
Tools Required: Jack, jack stands, socket set, torque wrench.

4. Engine Mounts Check

Sub-steps:
- Inspect engine mounts for cracks or excessive wear.
- Replace any damaged mounts to reduce engine movement during acceleration.
Tools Required: Socket set, pry bar.

5. Driveshaft and CV Joint Inspection

Sub-steps:
- Inspect the driveshaft for any bends or damage.
- Check CV joints for grease leaks or torn boots; replace if necessary.
Tools Required: Socket set, jack, jack stands.