how to fix Honda Accord 9th Generation (2013-2017) ABS light that stays on?

Honda Accord 9th Generation (2013-2017)

Error Codes

1-3 hours

Time

medium

Difficulty

high

Severity

3 min read

493 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the ABS light issue on Honda Accord 2013-2017. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Ensure the vehicle is securely lifted and supported when working under the vehicle.

Symptoms

•ABS warning light illuminated on the dashboard
•Reduced braking efficiency or responsiveness
•Increased stopping distances
•Possible brake pedal pulsation during hard braking
•No noticeable change in the vehicle's braking performance

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific ABS-related fault codes.
2
Inspect the ABS fuse for continuity and functionality.
3
Check the brake fluid level and condition, ensuring it meets specifications.
4
Inspect the ABS wheel speed sensors for damage, debris, or disconnection.
5
Verify the integrity of the ABS module wiring and connectors for corrosion or loose connections.
6
Test the ABS pump operation using the scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Basic hand tools (screwdrivers, pliers)

Parts Required

•ABS wheel speed sensor (if faulty)
•ABS module (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific ABS-related fault codes.
2
Inspect the ABS fuse for continuity and functionality.
3
Check the brake fluid level and condition, ensuring it meets specifications.
4
Inspect the ABS wheel speed sensors for damage, debris, or disconnection.
5
Verify the integrity of the ABS module wiring and connectors for corrosion or loose connections.
6
Test the ABS pump operation using the scanner.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal to ensure safety while working on electrical components.

2. Inspect and Test ABS Wheel Speed Sensors

Sub-steps:
1. Locate the ABS wheel speed sensors at each wheel.
2. Remove the sensor wiring harness connectors.
3. Use a multimeter to measure the resistance of each sensor; refer to manufacturer specifications (typically around 1,000-2,000 ohms).
4. Clean any debris from the sensor and surrounding area.
5. Reconnect the sensors and ensure they are secured properly.

3. Check ABS Module and Wiring

Sub-steps:
1. Visually inspect the ABS module for any signs of physical damage.
2. Check all wiring and connectors leading to the module for corrosion or disconnection.
3. If any wiring is damaged, repair or replace as necessary.
4. Reconnect all connections securely.

4. Replace Faulty Components

Sub-steps:
1. If the diagnostic codes indicate a faulty wheel speed sensor or ABS module, order the replacement part.
2. Follow the manufacturer’s instructions for removal and installation of the faulty component.
3. Torque any bolts or fasteners to the recommended specifications.
4. Reconnect the battery terminal once repairs are complete.