why does my Honda Accord 10th Generation (2018-2022) shake when I brake

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

467 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms and solutions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical components.
•Allow the brakes to cool before servicing to avoid burns.

Symptoms

•Steering wheel shakes during braking
•Vibration felt in the brake pedal
•Noise from the brakes (squeaking or grinding)
•Uneven wear on brake pads or rotors
•Vehicle pulls to one side while braking

Diagnostic Steps

1
Inspect brake pads for wear and uneven surfaces.
2
Check brake rotors for warping or scoring.
3
Examine brake calipers for proper functioning and sticking.
4
Assess suspension components (e.g., control arms, tie rods) for wear or damage.
5
Test drive the vehicle to confirm if the symptoms persist.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Socket set
•Torque wrench
•Brake cleaner
•Dial indicator

Parts Required

•Brake pads
•Brake rotors
•Brake caliper (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface and the parking brake is engaged.
Wear safety goggles and gloves.

2. Remove Wheel

Use a lug wrench to loosen wheel nuts.
Lift the vehicle using a jack and secure it with jack stands.
Remove the wheel to access the brake components.

3. Inspect Brake Components

Brake Pads: Remove the caliper bolts using a socket set and inspect the pads for uneven wear. Replace if necessary.
Brake Rotors: Check the surface of the rotors for warping or scoring. Use a dial indicator to measure any run-out. If warped, replace the rotors.
Brake Calipers: Ensure calipers move freely. If they are stuck, they may need rebuilding or replacement.

4. Reassemble Components

If brake pads and rotors are replaced, apply brake grease to the back of the pads before installation.
Reattach the caliper to the bracket and torque the caliper bolts to the manufacturer's specifications (usually around 20-30 ft-lbs).
Reinstall the wheel and hand-tighten the lug nuts.

5. Lower Vehicle and Final Check

Lower the vehicle and remove jack stands.
Torque the lug nuts to the specified value (typically 80-100 ft-lbs).
Pump the brake pedal a few times to ensure proper brake engagement.