why does my Honda Accord 10th Generation (2018-2022) have a loud exhaust noise?

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

505 words

Problem Statement

Learn how to diagnose and fix loud exhaust noise in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Exhaust System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Allow the engine to cool before working on the exhaust system.
•Wear safety glasses and gloves when working under the vehicle.

Symptoms

•Loud exhaust noise, especially during acceleration
•Possible vibrations felt in the cabin
•Decreased fuel efficiency
•Check engine light illuminated (if applicable)
•Unusual exhaust odors

Diagnostic Steps

1
Inspect the exhaust system visually for any visible cracks or holes.
2
Use an OBD-II scanner to check for any error codes related to the exhaust system.
3
Examine the exhaust hangers and mounts for wear or damage.
4
Check the exhaust manifold for leaks or cracks.
5
Inspect the catalytic converter for signs of damage or blockage.
6
Use a sound meter to quantify the noise level and determine if it exceeds normal operating limits.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Reciprocating saw
•Exhaust clamps
•Sound meter

Parts Required

•Replacement muffler (if damaged)
•Exhaust pipe section (if damaged)
•Exhaust hangers (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the exhaust system visually for any visible cracks or holes.
2
Use an OBD-II scanner to check for any error codes related to the exhaust system.
3
Examine the exhaust hangers and mounts for wear or damage.
4
Check the exhaust manifold for leaks or cracks.
5
Inspect the catalytic converter for signs of damage or blockage.
6
Use a sound meter to quantify the noise level and determine if it exceeds normal operating limits.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to ensure safety during repairs.

2. Inspect and Repair Exhaust System

Inspect Exhaust Components:
- Use a flashlight to check for cracks or holes in the exhaust pipes, muffler, and catalytic converter.
- If damage is found, proceed to replace the affected components.
Replace Damaged Parts:
- If the muffler is damaged:
  1. Use a socket set to remove the mounting bolts.
  2. Detach the old muffler and install a new one, tightening the bolts to the manufacturer’s specified torque value (usually around 20-30 ft-lbs).
- If the exhaust pipe is damaged:
  1. Cut out the damaged section using a reciprocating saw.
  2. Install a new piece using exhaust clamps, ensuring a tight fit to prevent leaks.

3. Reinstall Components

Ensure all exhaust components are securely fastened and that there are no loose connections.
Reattach any hangers or mounts that were removed for inspection.

4. Final Checks

Reconnect the battery.
Start the engine and check for any exhaust leaks by listening for hissing or popping sounds.
Ensure the exhaust noise is back to normal levels.