how to reset the tire pressure light on my Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

426 words

Problem Statement

Learn how to reset the tire pressure light on your 2018-2022 Honda Accord. Step-by-step guide with diagnostic steps and safety tips included.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always check tire pressures when tires are cold for accurate readings.
•Ensure the vehicle is parked safely while performing the reset.

Symptoms

•Tire pressure warning light remains illuminated on the dashboard
•Tire pressure monitoring system (TPMS) may show incorrect tire pressures
•No other warning lights illuminated
•Possible uneven or low tire pressure detected

Diagnostic Steps

1
Check each tire's pressure with a reliable tire pressure gauge to ensure they are inflated to the manufacturer's recommended PSI.
2
Inspect the tires visually for any signs of damage or leaks.
3
Verify that the TPMS sensors are functioning by checking for any error codes with an OBD-II scanner.
4
Ensure the vehicle is in a safe location, ideally on level ground, before attempting to reset the TPMS.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Ignition key or key fob

Parts Required

•None required for the reset, but consider TPMS sensor replacement if issues persist.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check each tire's pressure with a reliable tire pressure gauge to ensure they are inflated to the manufacturer's recommended PSI.
2
Inspect the tires visually for any signs of damage or leaks.
3
Verify that the TPMS sensors are functioning by checking for any error codes with an OBD-II scanner.
4
Ensure the vehicle is in a safe location, ideally on level ground, before attempting to reset the TPMS.

Solution

1. Preparation

Ensure all tires are properly inflated to the recommended PSI.
Gather the necessary tools: the vehicle's ignition key or key fob.

2. Turn on the Ignition

Insert the ignition key or press the start button without starting the engine to turn on the electrical system.
Wait for the dashboard lights to illuminate.

3. Reset the TPMS

Locate the TPMS reset button, typically found under the steering wheel or near the driver's side door.
Press and hold the TPMS reset button until the tire pressure light blinks three times, then release it.

4. Complete the Process

Start the vehicle and allow it to run for a few minutes. The tire pressure light should turn off if the reset was successful.
Drive the vehicle for about 10 minutes at speeds above 30 mph to help the system recalibrate.