how to fix the rear view camera issues in my Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

519 words

Problem Statement

Learn how to diagnose and fix rear view camera issues in Honda Accord 10th Generation (2018-2022). Step-by-step guide with tools and tips.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid shorts or shocks.

Symptoms

•Rear view camera display is blank or not turning on
•Distorted or unclear image displayed on the screen
•Camera intermittently loses connection
•Warning message displayed on the dashboard
•Delay in camera activation when shifting to reverse

Diagnostic Steps

1
Inspect the rear view camera for physical damage or obstructions.
2
Check the connection of the camera harness to the body control module.
3
Use an OBD-II scanner to check for any related error codes.
4
Verify the vehicle’s reverse light operation, as it may affect camera function.
5
Test the camera voltage with a multimeter to ensure it receives power.
6
Check the display screen settings to ensure the camera feed is selected correctly.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Multimeter
•OBD-II scanner
•Trim removal tool

Parts Required

•Replacement rear view camera

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the rear view camera for physical damage or obstructions.
2
Check the connection of the camera harness to the body control module.
3
Use an OBD-II scanner to check for any related error codes.
4
Verify the vehicle’s reverse light operation, as it may affect camera function.
5
Test the camera voltage with a multimeter to ensure it receives power.
6
Check the display screen settings to ensure the camera feed is selected correctly.

Solution

1. Preparation

Gather all necessary tools and parts.
Disconnect the vehicle's battery to ensure safety while working on electrical components.
Tools Required: Socket set, multimeter, OBD-II scanner, trim removal tool.

2. Inspect the Camera

Remove any obstructions around the camera lens.
Check the camera for physical damage (cracks, dirt).
If damaged, proceed with replacement.

3. Check Connections

Access the rear camera wiring by removing the trunk or hatch trim using a trim removal tool.
Locate the camera connector and ensure it is securely connected.
If loose, reconnect and secure the wiring harness.

4. Test Camera Power

Set the multimeter to measure DC voltage.
Connect the multimeter leads to the camera power pins in the harness.
Turn the ignition on and shift into reverse to check for power (should be around 12V).
If no power is detected, trace the wiring back to the body control module for any faults.

5. Replace Camera (if necessary)

If the camera is confirmed faulty, disconnect the wiring harness.
Remove the camera from its mounting bracket using the socket set.
Install the new camera by reversing the removal process, ensuring it is securely fastened.
Reconnect the wiring harness.

6. Reassemble and Test

Reinstall any trim pieces removed during inspection and repair.
Reconnect the vehicle's battery.
Test the rear view camera functionality by shifting into reverse and checking the display.