how to fix Honda Accord 10th Generation (2018-2022) suspension noise

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

493 words

Problem Statement

Learn how to diagnose and fix suspension noise in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Ensure the vehicle is securely lifted before beginning work on the suspension.

Symptoms

•Clunking or rattling noise when driving over bumps
•Noise while turning or cornering
•Increased road vibrations felt in the cabin
•Uneven tire wear
•Vehicle feels unstable during acceleration or braking

Diagnostic Steps

1
Conduct a visual inspection of the suspension components for any signs of wear or damage.
2
Check for loose bolts or nuts in the suspension assembly.
3
Test drive the vehicle to replicate the noise and identify specific conditions (speed, turning, etc.).
4
Inspect the shock absorbers or struts for leaks or signs of failure.
5
Assess the condition of bushings and ball joints for cracks or excessive play.
6
Measure the ride height to ensure suspension components are properly installed.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Floor jack
•Jack stands
•Socket set
•Torque wrench
•Ball joint separator
•Suspension bushing tool

Parts Required

•Replacement shock absorbers or struts (if needed)
•Control arm bushings (if needed)
•Ball joints (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Conduct a visual inspection of the suspension components for any signs of wear or damage.
2
Check for loose bolts or nuts in the suspension assembly.
3
Test drive the vehicle to replicate the noise and identify specific conditions (speed, turning, etc.).
4
Inspect the shock absorbers or struts for leaks or signs of failure.
5
Assess the condition of bushings and ball joints for cracks or excessive play.
6
Measure the ride height to ensure suspension components are properly installed.

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Wear safety glasses and gloves.

2. Lift the Vehicle

Sub-steps:
- Use a jack to lift the front or rear of the vehicle, depending on the noise location.
- Secure the vehicle with jack stands.
Tools Required: Floor jack, jack stands.

3. Inspect and Replace Components

Sub-steps:
- Inspect the shock absorbers or struts for leaks. If damaged, remove the old units:
  1. Remove the wheel to access the suspension.
  2. Unbolt the top mounting nuts and bottom bolts of the strut/shock.
  3. Install the new strut/shock in reverse order and torque to specification (usually around 30-50 lb-ft).
- Check control arm bushings and ball joints for wear:
  1. If worn, use a ball joint separator tool to remove the ball joint.
  2. Replace bushings using a press or a suitable tool.
Tools Required: Socket set, torque wrench, ball joint separator, suspension bushing tool.

4. Reassemble and Lower the Vehicle

Sub-steps:
- Reinstall the wheel and hand-tighten the lug nuts.
- Lower the vehicle to the ground and then torque the lug nuts to specification (typically 80-100 lb-ft).
Tools Required: Torque wrench.