how to fix Honda Accord 10th Generation (2018-2022) suspension noise

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

522 words

Problem Statement

Learn how to diagnose and fix suspension noise in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Ensure the vehicle is securely supported before performing any work.

Symptoms

•Clunking or knocking noise when driving over bumps
•Creaking sounds during turns or when going over uneven surfaces
•Excessive vibration felt in the cabin
•Vehicle feels unstable or has poor handling
•Uneven tire wear

Diagnostic Steps

1
Inspect the suspension components visually for signs of wear or damage.
2
Check for loose or damaged bolts/nuts in the suspension assembly.
3
Use a stethoscope or mechanic's stethoscope to pinpoint the source of the noise.
4
Perform a bounce test on each corner of the vehicle to assess strut performance.
5
Examine the sway bar links and bushings for wear or damage.
6
Validate tire pressures and inspect tires for uneven wear patterns.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Socket set
•Torque wrench
•Mechanic's stethoscope
•Bushing press

Parts Required

•New struts or shocks
•Sway bar links
•Suspension bushings

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the suspension components visually for signs of wear or damage.
2
Check for loose or damaged bolts/nuts in the suspension assembly.
3
Use a stethoscope or mechanic's stethoscope to pinpoint the source of the noise.
4
Perform a bounce test on each corner of the vehicle to assess strut performance.
5
Examine the sway bar links and bushings for wear or damage.
6
Validate tire pressures and inspect tires for uneven wear patterns.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Put on safety glasses and gloves.

2. Lift the Vehicle

Using a jack, raise the front or rear of the vehicle as needed.
Secure with jack stands for safety.

3. Inspect and Replace Components

Struts/Shocks:
- Remove the wheel to access the strut assembly.
- Disconnect the strut from the lower control arm and the top mount.
- Replace with new struts/shocks if leaking or damaged.
- Torque bolts to manufacturer specifications (typically around 50-70 ft-lbs).
Sway Bar Links:
- Inspect sway bar links for damage.
- Remove the bolts securing the links to the sway bar and control arm.
- Replace with new sway bar links.
- Torque to specifications (usually around 25-35 ft-lbs).
Bushings:
- Remove and replace any worn or damaged bushings on control arms or sway bars.
- Use a bushing press for installation if necessary.

4. Reassemble and Lower Vehicle

Reattach the wheels and lower the vehicle back to the ground.
Tighten lug nuts to the manufacturer's torque specification (typically around 80-100 ft-lbs).

5. Final Check

Perform a bounce test to ensure the suspension functions correctly.
Ensure all tools and parts are removed from under the vehicle.