why does my Honda Accord 9th Generation (2013-2017) transmission jerk when I accelerate

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

532 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine and transmission to cool before working to avoid burns.

Symptoms

•Transmission jerk during acceleration
•Delayed engagement when shifting from park to drive
•Slipping sensation while accelerating
•Check engine light illuminated
•Poor fuel economy
•Unusual transmission noises (grinding or whining)

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related issues.
2
Check the transmission fluid level and condition; ensure it is at the correct level and free of contaminants.
3
Inspect the transmission control module (TCM) for faults or updates.
4
Conduct a visual inspection of the transmission components, including mounts and linkage for wear or damage.
5
Test drive the vehicle to replicate the issue and determine under which conditions the jerking occurs (e.g., cold start, hot engine).
6
Check for any vacuum leaks in the intake system that might affect the engine's performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Transmission fluid pump
•Drain pan

Parts Required

•Honda ATF DW-1 transmission fluid
•Transmission filter (if applicable)
•Transmission pan gasket (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related issues.
2
Check the transmission fluid level and condition; ensure it is at the correct level and free of contaminants.
3
Inspect the transmission control module (TCM) for faults or updates.
4
Conduct a visual inspection of the transmission components, including mounts and linkage for wear or damage.
5
Test drive the vehicle to replicate the issue and determine under which conditions the jerking occurs (e.g., cold start, hot engine).
6
Check for any vacuum leaks in the intake system that might affect the engine's performance.

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface, and the parking brake is engaged.
Disconnect the battery to prevent electrical issues.

2. Fluid Change

Tools Required: Socket set, transmission fluid pump, drain pan.
Steps:
1. Place a drain pan under the transmission pan.
2. Remove the transmission pan bolts using a socket wrench.
3. Carefully lower the pan and allow the old fluid to drain completely.
4. Replace the transmission filter if applicable.
5. Reinstall the pan and torque the bolts to the manufacturer’s specifications (typically 8-10 ft-lbs).
6. Fill the transmission with the recommended fluid type (usually Honda ATF DW-1) through the dipstick tube.

3. TCM Reset/Update

Tools Required: OBD-II scanner.
Steps:
1. Reconnect the battery.
2. Use the OBD-II scanner to check for any TCM updates; if available, follow the manufacturer's instructions to update the software.
3. Clear any existing error codes from the TCM.

4. Inspect and Replace Components

Tools Required: Socket set, torque wrench, basic hand tools.
Steps:
1. Inspect the transmission mounts for signs of wear or damage; replace if necessary.
2. Check the linkage for proper adjustment and secure connections to the transmission.
3. Replace any worn or damaged components as needed.