why does my Honda Accord 9th Generation (2013-2017) make a squeaking noise

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

468 words

Problem Statement

Learn how to diagnose and fix squeaking noise in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Disconnect the battery before working on electrical systems.

Symptoms

•Squeaking noise when driving, especially over bumps or during turns
•Squeaking noise when applying brakes
•Noise present while idling
•Increased vibration felt in the steering wheel
•Unusual wear on tires or brake pads

Diagnostic Steps

1
Visually inspect the suspension components for wear or damage.
2
Check brake pads and rotors for wear; listen for noise during brake application.
3
Inspect drive belts and pulleys for signs of wear or misalignment.
4
Perform a test drive to isolate the noise under different conditions (e.g., turning, braking).
5
Use a stethoscope to pinpoint the source of the noise if necessary.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Brake cleaner
•Stethoscope (optional for noise pinpointing)

Parts Required

•Brake pads
•Brake rotors (if needed)
•Suspension bushings or struts (if needed)
•Drive belts (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Visually inspect the suspension components for wear or damage.
2
Check brake pads and rotors for wear; listen for noise during brake application.
3
Inspect drive belts and pulleys for signs of wear or misalignment.
4
Perform a test drive to isolate the noise under different conditions (e.g., turning, braking).
5
Use a stethoscope to pinpoint the source of the noise if necessary.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a level surface and the ignition is off.
Disconnect the battery if working on electrical components.

2. Inspect and Replace Brake Components

Sub-steps:
1. Remove the wheel to access brake components.
2. Inspect brake pads for wear; replace if less than 3mm thickness.
3. Check brake rotors for scoring; replace if necessary.
4. Apply brake grease to the back of the pads to reduce noise.
5. Reassemble the brake components and wheel, tightening lug nuts to the manufacturer’s torque specifications.

3. Inspect and Replace Suspension Components

Sub-steps:
1. Check shock absorbers and struts for leaks or damage.
2. Replace any worn bushings or mounts that could cause noise.
3. Lubricate suspension joints if applicable.
4. Reassemble any disassembled parts, ensuring all bolts are torqued to specifications.

4. Inspect and Replace Drive Belts

Sub-steps:
1. Remove any covers obstructing access to the drive belts.
2. Check for cracks, fraying, or looseness in the belts.
3. Replace any damaged belts and adjust tension as necessary.
4. Reinstall covers and reconnect any electrical components removed.