why does my Honda Accord 9th Generation (2013-2017) make a popping sound when turning

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

538 words

Problem Statement

Learn how to diagnose and fix the popping sound when turning in Honda Accord 9th Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the engine to cool before inspecting the area near the exhaust.

Symptoms

•Popping or clicking noise during turns
•Noise occurs more prominently at low speeds
•Vibration felt through the steering wheel
•Uneven tire wear
•Steering feels loose or imprecise

Diagnostic Steps

1
Inspect the front suspension components for wear or damage, focusing on control arms and bushings.
2
Check the CV joints for any signs of wear or damage, particularly the outer CV boot.
3
Verify the condition of the struts and shocks, looking for leaks or physical damage.
4
Examine the steering linkage for any loose or damaged parts.
5
Test drive the vehicle in a controlled environment to replicate the noise and note conditions that trigger it.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•CV joint puller
•Pry bar

Parts Required

•CV joint (if damaged)
•Control arm (if damaged)
•Suspension bushings (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the front suspension components for wear or damage, focusing on control arms and bushings.
2
Check the CV joints for any signs of wear or damage, particularly the outer CV boot.
3
Verify the condition of the struts and shocks, looking for leaks or physical damage.
4
Examine the steering linkage for any loose or damaged parts.
5
Test drive the vehicle in a controlled environment to replicate the noise and note conditions that trigger it.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery to ensure safety.

2. Inspect and Replace CV Joint

Tools Required: Socket set, torque wrench, CV joint puller
Sub-steps:
1. Raise the front of the vehicle and secure it on jack stands.
2. Remove the wheel on the affected side using a socket wrench.
3. Inspect the outer CV joint for any signs of damage or tearing in the boot.
4. If damage is found, use a CV joint puller to remove the old joint.
5. Install the new CV joint, ensuring it is properly seated and secure.
6. Reinstall the wheel and torque the lug nuts to the manufacturer’s specification.

3. Inspect and Replace Suspension Components

Tools Required: Socket set, torque wrench, pry bar
Sub-steps:
1. With the vehicle still raised, visually inspect the control arms and bushings for any cracks or excessive wear.
2. Use a pry bar to check for play in the bushings. If they feel loose, they should be replaced.
3. Remove the necessary bolts to detach the affected control arm.
4. Replace with a new control arm, ensuring proper alignment with the bushings.
5. Torque all bolts to the manufacturer’s specification.

4. Inspect Steering Components

Tools Required: Socket set, torque wrench
Sub-steps:
1. Inspect the steering linkage for any signs of looseness or damage.
2. Tighten any loose bolts or replace damaged components as necessary.
3. Ensure that all connections are secure and torque to specification.