how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

379 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 9th Generation (2013-2017) with this step-by-step guide. Ensure your vehicle's maintenance status is clear.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a secure location and the gear is in 'Park' or 'Neutral' before attempting to reset the maintenance light.

Symptoms

•Maintenance light remains illuminated on the dashboard
•Vehicle owner requires confirmation that maintenance has been performed
•Potential confusion regarding vehicle maintenance status

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position.
2
Turn the ignition switch to the 'ON' position without starting the engine.
3
Locate the odometer/trip button on the dashboard.
4
Press and hold the odometer/trip button until the display shows 'Maintenance Minder.'
5
Release the odometer/trip button and press it again to access the reset option.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for resetting the maintenance light

Parts Required

•None required for resetting the maintenance light

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position.
2
Turn the ignition switch to the 'ON' position without starting the engine.
3
Locate the odometer/trip button on the dashboard.
4
Press and hold the odometer/trip button until the display shows 'Maintenance Minder.'
5
Release the odometer/trip button and press it again to access the reset option.

Solution

1. Preparation

Ensure the vehicle is parked in a safe location.
Have the vehicle key or key fob ready for ignition.

2. Access the Maintenance Light Reset

Turn the ignition switch to the "ON" position (do not start the engine).
Observe the dashboard lights; ensure the maintenance light is illuminated.
Locate the odometer/trip button, typically found on the instrument panel.

3. Reset the Maintenance Light

Press and hold the odometer/trip button for about 10 seconds until the maintenance light begins to blink.
Release the button; the display should show "Maintenance Minder."
Press the odometer/trip button again and hold until the maintenance light resets (the display will show “Reset” or return to the odometer).
Turn the ignition off and then back on to ensure the light is no longer illuminated.