how to reset my Honda Accord 9th Generation (2013-2017) tire pressure light

Honda Accord Eleventh Generation (2023-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

414 words

Problem Statement

Learn how to reset the tire pressure light on your 2013-2017 Honda Accord. Step-by-step guide to ensure proper tire pressure and system reset.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure that all tires are properly inflated to avoid handling issues while driving.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Incorrect tire pressure readings displayed
•Vehicle may exhibit a rough ride due to under-inflated tires

Diagnostic Steps

1
Verify that all tires are inflated to the manufacturer's recommended pressure.
2
Check the spare tire pressure (if equipped with a TPMS sensor).
3
Confirm that there are no punctures or damage to the tires.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Locate the tire pressure monitoring system (TPMS) reset button beneath the steering wheel or on the dashboard.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this procedure.

Parts Required

•None specifically required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that all tires are inflated to the manufacturer's recommended pressure.
2
Check the spare tire pressure (if equipped with a TPMS sensor).
3
Confirm that there are no punctures or damage to the tires.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Locate the tire pressure monitoring system (TPMS) reset button beneath the steering wheel or on the dashboard.

Solution

1. Preparation

Tools Required: None specifically required for this procedure.
Ensure all tires, including the spare, are inflated to the recommended pressure as indicated on the driver’s side door jamb.

2. Reset the Tire Pressure Monitoring System

Locate the TPMS Reset Button:
- Find the TPMS reset button under the steering column or dashboard area.
Press and Hold the TPMS Reset Button:
- With the ignition in the "ON" position (engine not running), press and hold the TPMS reset button until the tire pressure light blinks three times, then release the button.
Turn Off the Ignition:
- Turn the ignition to the "OFF" position and wait a few seconds.
Start the Engine:
- Start the engine and wait for a few minutes for the system to recalibrate. The tire pressure light should turn off if the tire pressures are correct.

3. Final Check

If the light remains illuminated after the reset, double-check tire pressures and repeat the reset procedure.