how to fix the key fob not working on my Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

30 minutes to 1 hour

Time

easy

Difficulty

medium

Severity

3 min read

442 words

Problem Statement

Learn how to fix a non-working key fob for Honda Accord 2013-2017. Step-by-step guide with diagnostic steps and battery replacement instructions.

Affected Component

Electrical

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and the ignition is off before working on the key fob

Symptoms

•Key fob buttons are unresponsive
•Vehicle does not respond to key fob signals
•Check key fob battery warning on the dashboard
•Inability to start the engine using the key fob
•Remote entry system failure

Diagnostic Steps

1
Inspect the key fob for physical damage or wear
2
Test the key fob battery voltage using a multimeter
3
Replace the key fob battery and check if the issue persists
4
Use a second key fob to determine if the problem is with the fob or the vehicle receiver
5
Scan the vehicle’s onboard diagnostics for any fault codes related to the keyless entry system

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small flathead screwdriver
•CR2032 battery
•OBD-II scanner

Parts Required

•New CR2032 key fob battery

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the key fob for physical damage or wear
2
Test the key fob battery voltage using a multimeter
3
Replace the key fob battery and check if the issue persists
4
Use a second key fob to determine if the problem is with the fob or the vehicle receiver
5
Scan the vehicle’s onboard diagnostics for any fault codes related to the keyless entry system

Solution

1. Preparation

Gather necessary tools and replacement parts.
Tools Required: Small flathead screwdriver, CR2032 battery, OBD-II scanner (optional).
Parts Required: New CR2032 key fob battery.
Safety Warnings: Ensure the vehicle is in park and the ignition is off before working on the key fob.

2. Open the Key Fob

Use the small flathead screwdriver to carefully pry open the key fob along the seam.
Take care not to damage the casing or internal components.

3. Replace the Battery

Remove the old battery from the key fob by gently lifting it out.
Note the orientation of the battery for correct installation.
Insert the new CR2032 battery in the same orientation as the old one.

4. Reassemble the Key Fob

Align the two halves of the key fob casing.
Press the halves together until they snap into place securely.

5. Test the Key Fob

Stand near the vehicle and press the lock/unlock buttons to check functionality.
If the key fob still does not work, consider reprogramming it or checking the vehicle's receiver.