how to fix the grinding noise when braking in my Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

568 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding noise when braking in Honda Accord 9th Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is secure on jack stands before working underneath it.
•Allow the brakes to cool before handling to avoid burns.

Symptoms

•Grinding or squeaking noise when brakes are applied
•Reduced braking efficiency or longer stopping distance
•Vibration or pulsation in the brake pedal
•Brake warning light illuminated on the dashboard
•Possible burning smell from the brakes

Diagnostic Steps

1
Inspect brake pads for wear and damage using a visual inspection.
2
Check brake rotors for scoring, warping, or rust.
3
Examine brake calipers for proper function and any signs of leakage.
4
Inspect brake fluid level and condition, ensuring it is clean and at the proper level.
5
Test drive the vehicle to replicate the noise and assess braking performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set and torque wrench
•Brake cleaner
•C-clamp or brake caliper tool

Parts Required

•Brake pads
•Brake rotors (if necessary)
•Brake fluid (if low)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and damage using a visual inspection.
2
Check brake rotors for scoring, warping, or rust.
3
Examine brake calipers for proper function and any signs of leakage.
4
Inspect brake fluid level and condition, ensuring it is clean and at the proper level.
5
Test drive the vehicle to replicate the noise and assess braking performance.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface, with the parking brake engaged.
Disconnect the battery for safety.

2. Remove Wheel

Use a jack to lift the vehicle and secure it with jack stands.
Loosen and remove the lug nuts using a socket set.
Remove the wheel to access the brake components.

3. Inspect and Replace Brake Pads

Remove the caliper by loosening the caliper bolts with appropriate socket size.
Carefully lift the caliper away from the rotor; do not let it hang by the brake line.
Inspect the brake pads; if they are worn down to less than 3mm, replace them.
To install new brake pads, remove the old ones and slide in the new pads into the caliper bracket.

4. Inspect and Replace Brake Rotors (if necessary)

Check the condition of the rotors; if they are scored or warped, they should be replaced.
Remove the rotor by removing the retaining screws or caliper bracket if necessary.
Clean the hub surface and install the new rotor, ensuring it is properly seated.

5. Reassemble Components

Reattach the caliper over the new pads and rotor, tightening the caliper bolts to the manufacturer's torque specifications (usually around 25-30 ft-lbs).
Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque the lug nuts to the manufacturer’s specifications (typically 80-100 ft-lbs).

6. Final Checks

Reconnect the battery.
Pump the brake pedal a few times to ensure the pads seat properly.
Test drive the vehicle to ensure the grinding noise is resolved.